bose acoustimass 10 series II outputs

Tjenok · 6th November 2011, 07:46 PM

Are the OUT- of the outputs connected in the subwoofer module?

NEO Dan · 04:17 AM

Not really sure what you are asking but wire it up like this:

Tjenok · 7th November 2011, 07:00 AM

I have to use a 7-wire multicable to connect the subwoofer module with the 2 front- and 2 backspeakers. So 1 wire is lacking and I want to combine the OUT- outputs of the backspeakers in one wire. Therefore I want to be sure that it's electrically possible. I could not find an internal diagram that clarifies this.

6th November 2011, 07:46 PM	#1
Tjenok diyAudio Member Join Date: Nov 2011 Location: Eemnes	bose acoustimass 10 series II outputs Are the OUT- of the outputs connected in the subwoofer module?

7th November 2011, 04:15 AM	#2
NEO Dan diyAudio Member Join Date: Jun 2008	Not really sure what you are asking but wire it up like this: __________________ Regards, Dan Last edited by NEO Dan; 7th November 2011 at 04:17 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bose Acoustimass 10 Series II	kamagong	Multi-Way	2	19th September 2007 01:31 AM
bose acoustimass 10 series II	kamagong	Multi-Way	21	13th September 2007 03:44 AM
How do I open a Bose Acoustimass 25 Series II	highviewvideo	Subwoofers	19	3rd August 2007 01:09 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th November 2011, 07:00 AM	#3
Tjenok diyAudio Member Join Date: Nov 2011 Location: Eemnes	I have to use a 7-wire multicable to connect the subwoofer module with the 2 front- and 2 backspeakers. So 1 wire is lacking and I want to combine the OUT- outputs of the backspeakers in one wire. Therefore I want to be sure that it's electrically possible. I could not find an internal diagram that clarifies this.