O-Audio out of the box.

[nonsuchpro]

Well, out of the sub box and gave it it's own. I was tired of crawling under my desk to do any adjustments.

[dirkwright]

I bought that amp! looking forward to using it! It seems to be the lowest distortion BASH amp out there. It's much better than the Dayton ones. Eric is a champ also when it comes to customer service.

[nonsuchpro]

Originally Posted by dirkwright

I bought that amp! looking forward to using it! It seems to be the lowest distortion BASH amp out there. It's much better than the Dayton ones. Eric is a champ also when it comes to customer service.

I agree... I have an Dayton SA100 and I like O-Audio much much much better. Especially for a sealed box since it has the PEQ.

[ODougbo]

Is it the 500 watt amp?

http://www.oaudio.com/500W_SUBAMP.html

[nonsuchpro]

Originally Posted by ODougbo

Is it the 500 watt amp?

http://www.oaudio.com/500W_SUBAMP.html

Yeah

[dirkwright]

Originally Posted by ODougbo

Is it the 500 watt amp?

http://www.oaudio.com/500W_SUBAMP.html

Well... 500 watts into 4 ohms... 300 into 8. pick your poison.

[nonsuchpro]

Originally Posted by dirkwright

Well... 500 watts into 4 ohms... 300 into 8. pick your poison.

I'm using it to power a Dayton Audio RSS265HF-4 10" Reference HF driver in a 2.2cf sealed box. http://www.parts-express.com/pe/show...number=295-460

I'm diggin it

[dirkwright]

Originally Posted by nonsuchpro

I'm using it to power a Dayton Audio RSS265HF-4 10" Reference HF driver in a 2.2cf sealed box. Dayton Audio RSS265HF-4 10" Reference HF Subwoofer 4 Ohm 295-460

I'm diggin it

I'm going to be using it drive this:
B&C SPEAKERS

[ODougbo]

A good woofer at a reasonable price? Might order one today. Since I’m a bass reflex junky, I would be putting in vented enclosure, leaning toward a larger size box (not smaller).
If the box design gets too large, I would probably go Isobaric.

Originally Posted by nonsuchpro

I'm using it to power a Dayton Audio RSS265HF-4 10" Reference HF driver in a 2.2cf sealed box. Dayton Audio RSS265HF-4 10" Reference HF Subwoofer 4 Ohm 295-460

I'm diggin it

[nonsuchpro]

Originally Posted by ODougbo

A good woofer at a reasonable price? Might order one today. Since I’m a bass reflex junky, I would be putting in vented enclosure, leaning toward a larger size box (not smaller).
If the box design gets too large, I would probably go Isobaric.

The driver I'm using is best suited for a ported design but I decided not too and use the PEQ on the amp to boost if I need it.. I have a Definitive Technologies Supercube I as my ground pounder, this sub is for music playback exclusively. I reccomend the 10", the bigger ones can sound woofy IMO.