i've been messing with this design, which is an 18sound design, using peavey low riders. i figured the box as a ported enclosure, 13 cuft tuned to 35hz. the box most likely will have to grow because i haven't taken into account my bracing. but anyways, i've read a thread that djk posted a reply about how he designs his manifolds. i like the push-pull concept.
Attachments
This will change things a bit:
Name: Peavey Low Rider18"
As measured by WT2
Fs = 37.45 Hz
Qms = 8.614
Vas = 237.8 liters
Cms = 110.6 µm/N
Mms = 163.3 g
Rms = 4.46 kg/s
P-Dia = 15.63 in
Sd = 1237 sq.cm
P-Vd = 1.107 liters
Qes = 0.556
Re = 5.873 ohms
Le = 1.958 mH
Z = 8 ohms
BL = 20.15 Tm
Qts = 0.522
no = 2.167 %
1-W SPL = 95.36 dB
2.83-V SPL = 96.7 dB
Name: Peavey Low Rider18"
As measured by WT2
Fs = 37.45 Hz
Qms = 8.614
Vas = 237.8 liters
Cms = 110.6 µm/N
Mms = 163.3 g
Rms = 4.46 kg/s
P-Dia = 15.63 in
Sd = 1237 sq.cm
P-Vd = 1.107 liters
Qes = 0.556
Re = 5.873 ohms
Le = 1.958 mH
Z = 8 ohms
BL = 20.15 Tm
Qts = 0.522
no = 2.167 %
1-W SPL = 95.36 dB
2.83-V SPL = 96.7 dB
- Status
- Not open for further replies.