Onkyo SKW-570 Subwoofer

sportsfreaked · 29th January 2011, 11:53 PM

I have an Onkyo subwoofer Model# SKW-570. On the back of teh sub it has a line input "jack" (not sure if it is called a jack). I have looked everywhere to try to find this part and I can not find it. It is soildered into the board. If anyone can help with a schematic or part number or where to look for one I would greatly appreciate it! Thanks for your time.

Ed

josha · 30th January 2011, 12:39 AM

Hi Ed,

In the manual it looks like a standard RCA socket, try

PCB Mounting phono sockets

Hope this helps, Josh.

sportsfreaked · 30th January 2011, 12:58 AM

JOSH>>>>> Thank you very much. I am by no means a expert on this stuff!! I try to fix things myself and know how to solder and desolder and thats about it. I do not know all the correct names as you can tell. Thanks again I really appreciate the help and time!!
Ed

sportsfreaked · 30th January 2011, 03:34 PM

Is there a supplier in the U.S. that carries this part. Also on my part it has a place for a screw to screw in on top of the socket does anyone know where I may find this type of PCB Phono Socket? Thanks again for your time and help!

ED

josha · 30th January 2011, 07:32 PM

Hi Ed,

Difficult to search the US from here (I just discovered!) and the screw mounts seem to have the mount just off to one side like these...

Switchcraft : PJRA SERIES RCA 1X1

The bottom few have the mounting lugs attached,

Again, hope this helps though, Josh.

29th January 2011, 11:53 PM	#1
sportsfreaked diyAudio Member Join Date: Jan 2011	Onkyo SKW-570 Subwoofer I have an Onkyo subwoofer Model# SKW-570. On the back of teh sub it has a line input "jack" (not sure if it is called a jack). I have looked everywhere to try to find this part and I can not find it. It is soildered into the board. If anyone can help with a schematic or part number or where to look for one I would greatly appreciate it! Thanks for your time. Ed

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PE 269-570 bookshelf speaker	GM	Full Range	7	18th October 2008 02:31 AM
Onkyo subwoofer skw-30, repair help needed	cm3	Subwoofers	9	2nd January 2007 05:19 PM
YAMAHA CDX 570 - any good?	deiksac	Digital Source	0	12th June 2006 11:07 AM
Apexjr's Onkyo 8" subwoofer	Richie V6	Subwoofers	9	27th January 2005 07:56 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th January 2011, 12:39 AM	#2
josha diyAudio Member Join Date: Apr 2005 Location: Holmfirth, West Yorkshire	Hi Ed, In the manual it looks like a standard RCA socket, try PCB Mounting phono sockets Hope this helps, Josh.

30th January 2011, 12:58 AM	#3
sportsfreaked diyAudio Member Join Date: Jan 2011	JOSH>>>>> Thank you very much. I am by no means a expert on this stuff!! I try to fix things myself and know how to solder and desolder and thats about it. I do not know all the correct names as you can tell. Thanks again I really appreciate the help and time!! Ed

30th January 2011, 03:34 PM	#4
sportsfreaked diyAudio Member Join Date: Jan 2011	Is there a supplier in the U.S. that carries this part. Also on my part it has a place for a screw to screw in on top of the socket does anyone know where I may find this type of PCB Phono Socket? Thanks again for your time and help! ED

30th January 2011, 07:32 PM	#5
josha diyAudio Member Join Date: Apr 2005 Location: Holmfirth, West Yorkshire	Hi Ed, Difficult to search the US from here (I just discovered!) and the screw mounts seem to have the mount just off to one side like these... Switchcraft : PJRA SERIES RCA 1X1 The bottom few have the mounting lugs attached, Again, hope this helps though, Josh.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)