Can you model a vented box in HornResp? - Page 2

soho54 · 11th December 2010, 02:01 PM

Antripodean,

Are you asking how to convert the BP Tapped Pipe from the spreadsheet into a normal 6th order BP enclosure? If so, there isn't a direct way. You have to start over, as a normal BP enclosure works a little differently from what is on my sheet.

In my signature there are examples of several BP enclosures in the Hornresp How-To. The two 6th Order Dual Reflex methods MaVo listed, and a Quasi-6th Order Series-Tuned enclosure.

Antripodean · 11th December 2010, 09:18 PM

Thanks MaVo and Soho!

Yes Soho, I was hoping to use your sheet and simply input data ;-) I use it for everything else

MaVo · 11th December 2010, 10:09 PM

cool guides, Soho. i didnt know about the TH -> Bandpass method

and about the original question... if you dont exactly know how to go for it, use one of the methods shown with some arbitrary numbers and look at the schematical drawing hornresp produces. could help to see how those numbers correlate with the box design.

11th December 2010, 02:01 PM	#11
soho54 diyAudio Member Join Date: Nov 2005 Location: Georgia	Antripodean, Are you asking how to convert the BP Tapped Pipe from the spreadsheet into a normal 6th order BP enclosure? If so, there isn't a direct way. You have to start over, as a normal BP enclosure works a little differently from what is on my sheet. In my signature there are examples of several BP enclosures in the Hornresp How-To. The two 6th Order Dual Reflex methods MaVo listed, and a Quasi-6th Order Series-Tuned enclosure. __________________ AkAbak How-To----Hornresp How-To----Eazy Horn Excel Spreadsheet

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
th speaker hornresp model needed... please help	justint	Subwoofers	7	9th February 2010 06:21 PM
How well does Hornresp model a TQL?	Geek	Multi-Way	3	21st October 2009 12:17 AM
Trying to model Imperial BLH with Hornresp - Is this right?	just a guy	Subwoofers	6	28th March 2008 11:50 PM
Can I mod an old labriynth box to be a vented box?	MikeHunt79	Subwoofers	7	23rd May 2006 06:44 PM
Closed box sub in vented box ?	MadMax	Multi-Way	3	17th May 2003 12:24 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th December 2010, 09:18 PM	#12
Antripodean diyAudio Member Join Date: Dec 2008	Thanks MaVo and Soho! Yes Soho, I was hoping to use your sheet and simply input data ;-) I use it for everything else

11th December 2010, 10:09 PM	#13
MaVo diyAudio Member Join Date: Jan 2006 Location: Herne	cool guides, Soho. i didnt know about the TH -> Bandpass method and about the original question... if you dont exactly know how to go for it, use one of the methods shown with some arbitrary numbers and look at the schematical drawing hornresp produces. could help to see how those numbers correlate with the box design.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)