Single sheet TH challenge

Hi!
Playing a bit with cone correction on SS15:

First without, than a circle ring in front of the cones at two boxes, a longitudinal cone correction at two boxes and now will compare with circle piramid in the horn in front of the cones.

http://img2.uploadhouse.com/fileuploads/17468/17468113cdf7ea29d1b2c9b4452ba257c87b87e4.jpg

http://img9.uploadhouse.com/fileuploads/17468/1746813177acbd9f6c1056db8ffe8b15003d7d29.jpg

http://img4.uploadhouse.com/fileuploads/17468/174681254744a39d4dac208433ce5947dce11e71.jpg

Regards,
 
I have a strange problem with my build. The ss15 is made a bit wider and loaded with B&C NDL76. Hornresp didnt show any problem with the modification so i went for it. When the volumes hits a certain level it sounds like the cone/spider/something-speaker-related starts to rattle. The noise gets louder as the level gets higher. I gentle tried to place my finger on the cone at the level the rattle begins and the rattle got loader.
Any ideas what the problem could be?
 
I'm new to this whole DIY world but knows how to handle a saw, so the problem seems very strange for me. I havnt applied a HP filter due to the fact I didn't knew it was
this important ;). It sounds like it could be the fix to my problem. I'm going to buy a 50hz one and I'll then get back to you when it's fixed (crossing fingers)
 
Looks like you guys are just copying the post number link, which will just link you to the page. If you click on the link and go to it, then copy the url in the browser, (that has post#12345) you'll get the right link.

Edit: Hm, maybe it does work the other way too, bizarre how the link looks like the page link but if you hover it for a few seconds, it changes...

Wizardry, wizardry everywhere.
 
Last edited:
Cal that took me to 181 :joker:
Maybe this is one for Forum Problems

My link will take you to the top of page 19 so I know you have yours set at 10 posts per page whereas at 40 it goes to 721, the top of page 19 again. It used to be that when you clicked the post box, it changed the URL to that particular post, now it doesn't seem to.
I am guessing Andrew is set to 50 posts per page.