Help with sub - diyAudio
Go Back   Home > Forums > Loudspeakers > Subwoofers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 31st January 2010, 10:37 AM   #1
diyAudio Member
 
Join Date: Jun 2009
Default Help with sub

Ok..My previous post was a little lame. I need a little advice on what to do with 2 subs, I know they may seem like toys to some here, but for now thats what I have to work with.
I have an ADC little sub, sealed chamber firing into a small ported enclosure, 10". Rated 41Hzto 165Hz. Crossover is 2 coils and 2 Caps, distibuting high pass to small sats. I have also laying around a Klipsch Promedia2.1 sub rated down to 31Hz, amp inoperable. The ADC woofer is a dual voice coil, I'd like to use the crossover to run the Klipsch and my question is can I run both woofer leads out of the crossover to the klipsch(only one pair off leads)or do I risk amp damage doing so?
Other alternative if anyone is familiar with the ADC....putting in a larger enclosure?
Any help would be appreciated.Imma poor guy with limited options
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 01:59 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2