38 hz tapped horn, volvotreter

[Henkjan]

near the entry of the wires I'd say. and given it is a heavy thing, at the bottom of the cabinet

[gibbed]

I made a pair of these - I find they sound better with the inductor off.

[radman12]

when cutting the circle subwoofer hole how far up did you cut it from the piece of wood that is perpendicular to the hole. on the third picture you have some black marker writing thats the piece im referring too. how far up did you start your circle cut?

[Luke352]

I'm thinking of building two of these but using a derivitive of an Adire Extremis. But I was also thinking instead of making two 38hz ones he also has a 30hz version but it doesn't go as high, but I want the low end extension of the 30hz version and the upper end of the 38hz version. Do you think it would work if I used one of each versionin my room being used together. Obviously I realize the output at the outer edges will be lower due to only one driver covering each end of the range but I imagine that is better then nothing.

[Henkjan]

Originally Posted by salinemondo

I'm really interested in making this sub too, are these speakers available in the UK or the EU? if not then can anyone suggest a speaker that is available and cheap for making a small TH.

Tangband is available from Germany (Lautsprecher Selbstbau by blue planet acoustic) or Holland (Juoigâ) to name the countries nearest to the UK

[gibbed]

Originally Posted by radman12

when cutting the circle subwoofer hole how far up did you cut it from the piece of wood that is perpendicular to the hole. on the third picture you have some black marker writing thats the piece im referring too. how far up did you start your circle cut?

I really don't remember anymore, but I do remember that I followed volvetreter's plans exactly.