Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Subwoofer crossover point
Subwoofer crossover point
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 21st December 2001, 02:40 AM   #1
BAM is offline BAM
diyAudio Member
Join Date: Sep 2001
Location: Carmel, IN; West Lafayette, IN
Send a message via AIM to BAM
Default Subwoofer crossover point

I have a subwoofer amplifier with a variable crossover. My mains, with their Pioneer 8's and phenolic ring tweeters are a joke (from a frequency-response standpoint) , and are mostly for midbass and highs. They have a f0 of 65.35 Hz and an f3 of 60.62 Hz.

Where should I cross my sub over so that it has a smooth transition from satellite to sub? The crossover varies from 40 Hz to 160 Hz.

  Reply With Quote
Old 21st December 2001, 03:21 AM   #2
GRollins is offline GRollins  United States
diyAudio Member
Join Date: Feb 2001
Location: Columbia, SC
There are different schools of thought. I'd say the two most likely candidates would be to let the satellites run out their low end naturally and try to match their -3 dB point as best you can with the sub crossover--or--to cross over from the satellites to the sub at least an octave above their rolloff point with an active crossover. The octave above part is to let the satellite begin its rolloff in a controlled manner while the response is still nominally flat.

  Reply With Quote


Subwoofer crossover pointHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Crossover point jaudio Car Audio 1 14th September 2006 07:23 AM
Can you hear the crossover point of a speaker with a well-designed crossover? 454Casull Multi-Way 11 2nd April 2004 06:48 AM
Point to point crossover soldering Ilianh Multi-Way 9 24th December 2002 05:14 AM
A better crossover point Westrock2000 Multi-Way 9 26th October 2002 06:13 PM
Sub crossover point AudioFreak Multi-Way 2 31st December 2001 12:33 PM

New To Site? Need Help?

All times are GMT. The time now is 02:35 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio