Reflex Horn

gpsmithii · 13th September 2009, 07:49 PM

Hello,

I have just started to learn about the Hornresp tool. This months Audioxpress features an article on a speaker called the Jack10. There is not much information on how the system was molded, but it looks very much to be along the lines of what Altec & JBL refered to as reflex horns. I have utilized Martin Kings mathcad worksheets for several years to model several other types enclosures. At this time there is not a worksheet to model these types of enclosures. I'm looking for a tool that takes the generated output from hornresp to aid in laying out the horn. I have seen various postings that point to several spreadsheets, but none of these links seem to be working any more. I would be grateful for any assistance on the use of the hornresp tool and a spreadsheet to layout my exponential horn.

Regards

Rademakers · 14th September 2009, 10:37 AM

For using/learning Hornresp see http://forum.speakerplans.com/guide-...070.html#11070 (it's also in the diy-wiki but seemingly not available at the moment).

See also export and port assisted horns in the guide.

Regards Johan

gpsmithii · 14th September 2009, 11:04 AM

WOW! What a nice piece of work.
Thanks!

14th September 2009, 10:37 AM	#2
Rademakers diyAudio Member Join Date: Jan 2005 Location: Rotterdam, NL	For using/learning Hornresp see http://forum.speakerplans.com/guide-...070.html#11070 (it's also in the diy-wiki but seemingly not available at the moment). See also export and port assisted horns in the guide. Regards Johan __________________ Impossibilities we do immediatly, miracles take slightly longer.

14th September 2009, 11:04 AM	#3
gpsmithii Account disabled at member's request Join Date: Oct 2003 Location: Atlanta	Reflex Horn WOW! What a nice piece of work. Thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front & rear end DUAL Back Loaded Horn + Bass Reflex Hybrid Enclosure	nickthevoice	Multi-Way	13	19th May 2009 03:09 PM
RCA MI-1425 with MI-1469 Horn, MI-1457 (W-horn) with RCA MI-? fieldcoil woofer	thekop-bkk	Swap Meet	0	26th September 2008 03:55 AM
Fostex reccomended bass reflex/horn	Phergus_25	Full Range	6	15th March 2007 06:08 AM
Horn on reflex port?	Circlotron	Multi-Way	4	31st December 2002 03:02 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th September 2009, 07:49 PM	#1
gpsmithii Account disabled at member's request Join Date: Oct 2003 Location: Atlanta	Reflex Horn Hello, I have just started to learn about the Hornresp tool. This months Audioxpress features an article on a speaker called the Jack10. There is not much information on how the system was molded, but it looks very much to be along the lines of what Altec & JBL refered to as reflex horns. I have utilized Martin Kings mathcad worksheets for several years to model several other types enclosures. At this time there is not a worksheet to model these types of enclosures. I'm looking for a tool that takes the generated output from hornresp to aid in laying out the horn. I have seen various postings that point to several spreadsheets, but none of these links seem to be working any more. I would be grateful for any assistance on the use of the hornresp tool and a spreadsheet to layout my exponential horn. Regards

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)