Need help seting up my SWR-1222D

blair99 · 10th April 2009, 05:48 PM

<a href="http://s626.photobucket.com/albums/tt341/9blair99/?action=view&current=subsetup.jpg" target="_blank"><img src="http://i626.photobucket.com/albums/tt341/9blair99/subsetup.jpg" border="0" alt="sub set up"></a>

I have a SWR-1222D and i was wounder what is the best way to set up my sub. ( Plug in config)

I have a iDA-X100 deck and a
PHOENIX GOLD RSd 1200.1 1200-Watt Sub Woofer.

So if some one could tell my what example to use from the Manuel that would help me out a lot thanks.

littlemike · 10th April 2009, 06:59 PM

Your sub amp is not 1-ohm stable, so you have to use the diagram in example 1. This wires the coils in series, resulting in a 4 ohm load.

Your amp will deliver more power than the driver is rated for (675 vs 500) with a 4 ohm load, and will run cooler.

blair99 · 10th April 2009, 07:20 PM

example one is the best ok thanks so much. I have when threw 3 subs so far.

10th April 2009, 05:48 PM	#1
blair99 diyAudio Member Join Date: Sep 2008	Need help seting up my SWR-1222D <a href="http://s626.photobucket.com/albums/tt341/9blair99/?action=view&current=subsetup.jpg" target="_blank"><img src="http://i626.photobucket.com/albums/tt341/9blair99/subsetup.jpg" border="0" alt="sub set up"></a> I have a SWR-1222D and i was wounder what is the best way to set up my sub. ( Plug in config) I have a iDA-X100 deck and a PHOENIX GOLD RSd 1200.1 1200-Watt Sub Woofer. So if some one could tell my what example to use from the Manuel that would help me out a lot thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MarantZ CD65 seting-up?	ZuMbAiU	Digital Source	2	12th March 2006 03:58 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th April 2009, 06:59 PM	#2
littlemike diyAudio Member Join Date: Jul 2008 Location: Pacific Northwest	Your sub amp is not 1-ohm stable, so you have to use the diagram in example 1. This wires the coils in series, resulting in a 4 ohm load. Your amp will deliver more power than the driver is rated for (675 vs 500) with a 4 ohm load, and will run cooler.

10th April 2009, 07:20 PM	#3
blair99 diyAudio Member Join Date: Sep 2008	example one is the best ok thanks so much. I have when threw 3 subs so far.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)