DIY sub with sumo A II

Sponkii · 19th February 2009, 06:00 PM

hey.

I have a single channel from a SUMO andromedea II

that i have the intention to drive a sub woofer.

does anyone have some good input to design and use of speaker.

my intention is to use it as a "party" woofer..

aznboi3644 · 19th February 2009, 08:24 PM

Buy this
http://www.parts-express.com/pe/show...TOKEN=37640150

and a build a big enclosure for it...it should be a good "party sub"

Sponkii · 19th February 2009, 09:24 PM

Okay that is a party woofer.. but it is WAY over my budget..

the power handling of the andromedea is around 200watt at 8ohm

Sponkii · 20th February 2009, 12:46 PM

could this be a possibility ?...

http://www.discoworld.dk/shop/produc...oducts_id=6549

Sponkii · 27th February 2009, 06:14 PM

i thought about this unit.

http://www.discoworld.dk/shop/produc...ducts_id=18991

here is plot

http://img514.imageshack.us/img514/9704/plot.png

im going to make it vented, but what is best one "big" vent or two smaller?

http://img504.imageshack.us/img504/6531/box.png

Sponkii · 2nd March 2009, 09:55 AM

Is all hope lost ?

bjorno · 2nd March 2009, 03:49 PM

Quote:

..my intention is to use it as a "party" woofer..

For 'Party' use I vote for using a 50 L closed box.

b

1(1)

Sponkii · 2nd March 2009, 07:52 PM

Sorry...

i have already made the cabinet (or it is on the way)

went for a ventet system as i intend to use as a sub for home use as well, and i want low fs, cabi is around 90L..

Sponkii · 2nd March 2009, 08:43 PM

Nothing holding it together just placed together

Here is the side mounted, and rear cover is being cut.

most of back panel made, still not mounted.

The inside:

Here is it with the front.. it is not mounted yet

Sponkii · 3rd March 2009, 08:01 PM

Everything is moving along

..

putting in trafo

Switch

inside with trafo mounted (standing on the side), and last hole for fuse holders is drilled..

19th February 2009, 06:00 PM	#1
Sponkii diyAudio Member Join Date: Dec 2008	DIY sub with sumo A II hey. I have a single channel from a SUMO andromedea II that i have the intention to drive a sub woofer. does anyone have some good input to design and use of speaker. my intention is to use it as a "party" woofer..

19th February 2009, 09:24 PM	#3
Sponkii diyAudio Member Join Date: Dec 2008	speaker... Okay that is a party woofer.. but it is WAY over my budget.. the power handling of the andromedea is around 200watt at 8ohm

20th February 2009, 12:46 PM	#4
Sponkii diyAudio Member Join Date: Dec 2008	?? could this be a possibility ?... http://www.discoworld.dk/shop/produc...oducts_id=6549

27th February 2009, 06:14 PM	#5
Sponkii diyAudio Member Join Date: Dec 2008	speaker i thought about this unit. http://www.discoworld.dk/shop/produc...ducts_id=18991 here is plot http://img514.imageshack.us/img514/9704/plot.png im going to make it vented, but what is best one "big" vent or two smaller? http://img504.imageshack.us/img504/6531/box.png

2nd March 2009, 09:55 AM	#6
Sponkii diyAudio Member Join Date: Dec 2008	?? Is all hope lost ?


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th February 2009, 08:24 PM	#2
aznboi3644 diyAudio Member Join Date: Dec 2007	Buy this http://www.parts-express.com/pe/show...TOKEN=37640150 and a build a big enclosure for it...it should be a good "party sub"

2nd March 2009, 07:52 PM	#8
Sponkii diyAudio Member Join Date: Dec 2008	cabinet Sorry... i have already made the cabinet (or it is on the way) went for a ventet system as i intend to use as a sub for home use as well, and i want low fs, cabi is around 90L..

2nd March 2009, 08:43 PM	#9
Sponkii diyAudio Member Join Date: Dec 2008	pic Nothing holding it together just placed together Here is the side mounted, and rear cover is being cut. most of back panel made, still not mounted. The inside: Here is it with the front.. it is not mounted yet

3rd March 2009, 08:01 PM	#10
Sponkii diyAudio Member Join Date: Dec 2008	progress Everything is moving along .. putting in trafo Switch inside with trafo mounted (standing on the side), and last hole for fuse holders is drilled..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sumo Polaris 310	jackinnj	Solid State	31	18th June 2009 02:00 PM
sumo amp	steven344	Solid State	1	20th May 2006 07:30 AM
anyone here have a Sumo amp?	hakalugi	Solid State	0	13th December 2001 11:03 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read