|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
27th October 2008, 11:24 PM
|
#1 |
|
diyAudio Member
Join Date: Aug 2008
|
TH project. Need help with actual layout.
I have 2 Dayton 385-88 15" subwoofers lying around.
I want to build some 70 Hz and below subs with them. Looking at a TH, I have used HR to come up with something: Here's what I have come up with.   and also   I have a box I was going to rebuild. It is roughly 15 cubic feet. 3/4 " build measuring 23.25 w x 23.25 d x 55.5 t. So I used a max liter displacement of 428 Liters. The 2 I came up fell within that @ 346 and 387 Liters. With bracing etc I assume the finished product would be close to those numbers. But laying it out in a usable manner is another thing. Someone want to help me with the layout plans? |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New amplifier project -my layout | Curly Woods | Tubes / Valves | 7 | 11th January 2007 06:15 PM |
| Best way to translate schematic into actual layout? | bst | Tubes / Valves | 5 | 5th February 2006 09:49 PM |
| Actual Pcb for Aleph-X - Can anyone help? | lpm76 | Pass Labs | 5 | 24th September 2004 11:17 PM |
| How about our project of LM3886 layout | AlivinCai | Chip Amps | 4 | 12th December 2003 11:31 AM |
| New To Site? | Need Help? |
| Page generated in 0.06427 seconds (69.31% PHP - 30.69% MySQL) with 10 queries |
