TL Enclosure Design - Page 2

GM · 3rd April 2008, 03:38 AM

You're welcome!

Well, what can I say, I was in a hurry as usual and I'd already done a design ages ago for this driver, so just posted it without really reading your post in detail ergo didn't notice you were planning to use two drivers.

Bottom line, make the pipe twice as large at each end and 'connect the dots' with the drivers at the top.

MJK recommends putting the driver at 0.336*L = 23.52" down and while its marginally smoother to ~200 Hz, this is a sub, so end loading yields the most gain up to ~110 Hz.

GM

schmeet · 3rd April 2008, 01:21 PM

Thanks again,

I've have already done the design for two subs, (i.e. doubled the CSA) it was just putting the driver at the zdriver location i couldn't do.

I may use MJK's recommendation for zdriver as it allows me to place it more easily and also while it is a sub, its going to be playing up to about 500Hz...

3rd April 2008, 03:38 AM	#11
GM diyAudio Member Join Date: Jun 2003 Location: Chamblee, Ga.	You're welcome! Well, what can I say, I was in a hurry as usual and I'd already done a design ages ago for this driver, so just posted it without really reading your post in detail ergo didn't notice you were planning to use two drivers. Bottom line, make the pipe twice as large at each end and 'connect the dots' with the drivers at the top. MJK recommends putting the driver at 0.336*L = 23.52" down and while its marginally smoother to ~200 Hz, this is a sub, so end loading yields the most gain up to ~110 Hz. GM __________________ Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Enclosure design	marky_sparky	Full Range	8	16th August 2007 11:51 PM
Enclosure design	audiobahnkid592	Full Range	9	15th April 2007 05:02 AM
Enclosure design help	pjanda1	Full Range	20	27th March 2007 03:08 AM
Enclosure Design For A Sub	Big Kev !	Subwoofers	6	25th May 2005 03:39 PM
Need help with enclosure design	Lusso5	Multi-Way	3	5th December 2003 09:20 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

3rd April 2008, 01:21 PM	#12
schmeet diyAudio Member Join Date: Mar 2008	Thanks again, I've have already done the design for two subs, (i.e. doubled the CSA) it was just putting the driver at the zdriver location i couldn't do. I may use MJK's recommendation for zdriver as it allows me to place it more easily and also while it is a sub, its going to be playing up to about 500Hz...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)