Hornresp

[David McBean]

Originally posted by tb46
Another very useful and fun addition to a great program.
Thanks David.

Thanks Oliver :-)

Kind regards,

David

[David McBean]

Originally posted by iand
Is there a reason the tapped horn wizard doesn't work with 4 sections? It doesn't change the horn shape, only slides the tap points along the predefined shape, so I don't see the reason.

Hi Ian,

After posting my last message I thought some more about how the tapped horn wizard could be made to work with a four segment system, and have already started work on implementing the necessary changes :-).

The four segment input form will be as shown in the attached screenprint. Note that only those parameter values that are changed by the operation of the wizard are now displayed (S1, S3 and S5 values are not shown).

I will let everyone know once Hornresp Version 18.30 is released. It may take me a week or so to arrange, as I am a bit short on time at the moment.

Kind regards,

David

[Thawach]

David Please quickly. i'm waiting for as the same.


Thanks.... Thanks...Thanks

[iand]

Originally posted by David McBean


Hi Ian,

After posting my last message I thought some more about how the tapped horn wizard could be made to work with a four segment system, and have already started work on implementing the necessary changes :-).

The four segment input form will be as shown in the attached screenprint. Note that only those parameter values that are changed by the operation of the wizard are now displayed (S1, S3 and S5 values are not shown).

I will let everyone know once Hornresp Version 18.30 is released. It may take me a week or so to arrange, as I am a bit short on time at the moment.

Kind regards,

David

David, you deserve a medal :-)

Cheers

Ian

[David McBean]

Hi Thawach and Ian,

Just letting you know that Hornresp Version 18.30 has been released. The tapped horn wizard now works with both three and four segment systems.

Kind regards,

David

[Thawach]

McBean u are good...good...good...good...and good and good=very good. i'm waiting for...waiting for...waiting for.....=a long time


O..O..che i love u rarely.


Thanks

[iand]

Originally posted by David McBean
Hi Thawach and Ian,

Just letting you know that Hornresp Version 18.30 has been released. The tapped horn wizard now works with both three and four segment systems.

Kind regards,

David

That was a *very* short week... :-)

Thanks for all the work, it's rare indeed to get such a rapid response (or sometimes, any response) to requests for software enhancements.

Ian

[tb46]

Hi David,

After installing V18.30 I got an

"Invalid result. Change input data." error

on all tapped horn simulations.
I'm attaching an input parameter sheet for you to see. Maybe you can help. V18.20 works just great.
If you would be so kind as to take a look at this and let me know what I'm missing, I would appreciate it.

Thanks again for all the fine work, Regards

[Sabbelbacke]

Same here. "normal" horns seem to work fine, though. Switching to the tapped horn wizard shows calculated results.
Adding a 4th segment seems to get it working again.

One other thing I just encountered:

When using the max-SPL feature, a given limitation due to excursion is labeled as "power limited". It´s late already, am I thinking right, shouldn´t it be "xmax limited"?


I missed 18.20, does anybody have a copy?

David, once again. Thank you!!!

[454Casull]

It says "given no xmax limit". How can it be xmax limited?