Looking for a Subw for AV & Audio...

lsfarzo · 7th March 2008, 02:12 PM

Hi all,

since I bought a new plasma that I put in the same room where the HiFi lies I began thinking about the possibility to build a sub that would be driven by the TV subwoof. output (RCA) channel.

I'm looking for a sub that, anyway, would have some true audiofile inclination as I would make some experiments using it in my hifi, too, though its first employment will be for A/V.

As I'm new to the subw. world I made up my mind to ask to all you in order to get some suggestions.

My present hifi is:
Speakers: proac 2.5 clone
Pre: diy world audio desing phono II
Power: diy world audio desing KAT 6550 PP6550
CD: Philips DVD 963 SA
Phono: Thorens 126 MKII + SME 3009 + Benz Ace Low
Tape: Nakamichi Rx-202

The Plasma is a Pioneer PDP-428XD.

Best regards,
Luca
Napoli
Italia

e_fortier · 7th March 2008, 10:22 PM

Hi Luca,

If you need to listen to that sub with music I would recommend a sealed enclosure since it will give you the most accurate sound reproduction (it will not be boomy and it will be fast). If you get one from let's say Peerless XXLS SUBWOOFER then choose one with high excursion and you are all set.

See link http://www.tymphany.com/

Regards,
Eric

7th March 2008, 02:12 PM	#1
lsfarzo diyAudio Member Join Date: Nov 2007	Looking for a Subw for AV & Audio... Hi all, since I bought a new plasma that I put in the same room where the HiFi lies I began thinking about the possibility to build a sub that would be driven by the TV subwoof. output (RCA) channel. I'm looking for a sub that, anyway, would have some true audiofile inclination as I would make some experiments using it in my hifi, too, though its first employment will be for A/V. As I'm new to the subw. world I made up my mind to ask to all you in order to get some suggestions. My present hifi is: Speakers: proac 2.5 clone Pre: diy world audio desing phono II Power: diy world audio desing KAT 6550 PP6550 CD: Philips DVD 963 SA Phono: Thorens 126 MKII + SME 3009 + Benz Ace Low Tape: Nakamichi Rx-202 The Plasma is a Pioneer PDP-428XD. Best regards, Luca Napoli Italia

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Only N-Channel MOSFETs (NMOS); better Audio from non complements by Audio Power?	tiefbassuebertr	Solid State	43	22nd January 2012 12:50 PM
For Sale Or Trade: Adire Audio Brahma, Rythmik Audio Plate Amp	tmort	Swap Meet	5	27th June 2009 12:29 AM
Need schematic for Elevation Audio DX1500.1/Sundown Audio SAZ-1500D	jaimegmr	Car Audio	0	5th May 2009 06:39 PM
subw amp install ?	dbaudio	Car Audio	1	27th May 2006 08:02 PM
LM4780 for SubW	samsagaz	Chip Amps	11	24th September 2004 01:40 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th March 2008, 10:22 PM	#2
e_fortier diyAudio Member Join Date: May 2001 Location: Montreal	Hi Luca, If you need to listen to that sub with music I would recommend a sealed enclosure since it will give you the most accurate sound reproduction (it will not be boomy and it will be fast). If you get one from let's say Peerless XXLS SUBWOOFER then choose one with high excursion and you are all set. See link http://www.tymphany.com/ Regards, Eric

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)