|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
11th January 2008, 08:18 AM
|
#1 |
|
diyAudio Member
Join Date: Dec 2007
|
Hi-fi Sub parameters
hi,
based on the manufacturer data I have been unable to design an enclosure with valid parameters, using winISD. the manufacturer data is as follows: -Thiele Small Parameters (measured with voice coils in parallel) Power Handling: 300WRMS Impedance: 4 ohms (dual voice coil) Voice Coil Resistance: 1.7ohm Vas: 79.450 Ltr Qms: 3.238 Qes: 0.446 Qts: 0.392 Sensitivity: 88.152 dB/Wm BL: 9.992 TM Fo: 28.77 Hz Sd: 514.72 sqCM Weight: 8.5kg Can anyone suggest an enclosure size? I have heard that a sealed enclosure in the realms of 58Litres is suitable but I would have prefered a vented design. Cheers. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Parameters | Dr.EM | Full Range | 3 | 15th March 2007 02:44 PM |
| T/S parameters | masterp2 | Subwoofers | 1 | 23rd November 2006 02:18 AM |
| T/S Parameters | crippledchicken | Subwoofers | 4 | 25th July 2006 11:30 PM |
| E-V T/S Parameters | ingvar ahlberg | Multi-Way | 2 | 23rd April 2004 05:58 PM |
| T/S parameters | Doug | Multi-Way | 2 | 29th March 2003 10:25 AM |
| New To Site? | Need Help? |
| Page generated in 0.09865 seconds (73.38% PHP - 26.62% MySQL) with 10 queries |
