Shadow SD12 0V9

Cambe · 3rd December 2007, 10:50 PM

Greetings,
I am having a pair of the Shadow SD12 0V9 cabinets built. I was wondering if I could use these drivers from Parts Express #295-460, would work or not in the cabinets. I ask this only because I
already have the drivers mentioned from Parts Express already and haven't ordered the SD12's from Creative Sounds Solutions
yet.

Sincerely,
Cambe

GM · 4th December 2007, 05:31 AM

Greets!

Specs indicates it may be a bit under-damped, but nothing some extra stuffing can't handle if need be.

GM

Cambe · 4th December 2007, 12:32 PM

Hello GM,
where and how should the damping be placed?
I want to thank you also for helping me figure out the TL using the same PE driver.
Sincerely,
Cambe

GM · 4th December 2007, 04:10 PM

Greets!

For this style cab, I'd line the bottom, back, and one side to start and the other side and/or baffle next, then start doubling up if need be.

You're welcome! Did it perform well or are you trying this new cab because it doesn't?

GM

Cambe · 11th December 2007, 09:31 PM

Hello,
GM, the TL design you helped me with, is still on the drawing board. I planned to send you a copy of the drawing for the TL to
look over before building it. Just have not gotten around to it yet.
Cambe

3rd December 2007, 10:50 PM	#1
Cambe diyAudio Member Join Date: Aug 2001 Location: USA,NorthCarolina	Shadow SD12 0V9 Greetings, I am having a pair of the Shadow SD12 0V9 cabinets built. I was wondering if I could use these drivers from Parts Express #295-460, would work or not in the cabinets. I ask this only because I already have the drivers mentioned from Parts Express already and haven't ordered the SD12's from Creative Sounds Solutions yet. Sincerely, Cambe

4th December 2007, 04:10 PM	#4
GM diyAudio Member Join Date: Jun 2003 Location: Chamblee, Ga.	Greets! For this style cab, I'd line the bottom, back, and one side to start and the other side and/or baffle next, then start doubling up if need be. You're welcome! Did it perform well or are you trying this new cab because it doesn't? GM __________________ Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
One or Two Shadow Cabinets for Music?	tripathdude	Full Range	0	26th December 2008 03:16 AM
Peerless XLS 12" in Shadow Cabinet...	speakrsrfun	Subwoofers	0	9th June 2008 03:00 AM
Dual Extremis, the Shadow	Cal Weldon	Swap Meet	2	10th March 2008 06:38 PM
New CSS SD12 Vented Subwoofer	Timn8ter	Subwoofers	9	31st January 2007 08:02 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th December 2007, 05:31 AM	#2
GM diyAudio Member Join Date: Jun 2003 Location: Chamblee, Ga.	Greets! Specs indicates it may be a bit under-damped, but nothing some extra stuffing can't handle if need be. GM __________________ Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

4th December 2007, 12:32 PM	#3
Cambe diyAudio Member Join Date: Aug 2001 Location: USA,NorthCarolina	Hello GM, where and how should the damping be placed? I want to thank you also for helping me figure out the TL using the same PE driver. Sincerely, Cambe

11th December 2007, 09:31 PM	#5
Cambe diyAudio Member Join Date: Aug 2001 Location: USA,NorthCarolina	Hello, GM, the TL design you helped me with, is still on the drawing board. I planned to send you a copy of the drawing for the TL to look over before building it. Just have not gotten around to it yet. Cambe

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)