How to make Bass bins

Jaminator · 29th October 2007, 09:12 AM

Hello Folks,
i have Just sucessfully built the M-250 Amp found in the community and now am planning to make 4 of them to get 1000 watts system.
I am all set with the amplifiers.
I am buying these PA speakers for these Amps
http://www.paacoustic.com/Product_De...ctID=C18-600LF

and wanna build Bass bins for these babies.

First am confused on which design to choose, a Wbin or a cross bin.
Can any experienced person help me with choosing the design and also how to make it..
i havent found any material to how thw wooden boxes of bins are made i mean the details of the angles and etc etc.

Hoping for some help.

MaVo · 29th October 2007, 09:16 AM

there is info:

http://www.speakerplans.com/

Jaminator · 29th October 2007, 09:20 AM

Hey that was a quick reply

But i have seen this site...
But W bin is missing and it doesnt have much details abut which to choose and all

AKN · 29th October 2007, 09:29 AM

Hi,

Some W-bin plans here: http://www.dancetech.com/aa_dt_new/pa/pa-index.cfm
(further down the page)

Piek · 30th October 2007, 03:39 PM

Hi,

http://members.aol.com/xxbase80a/menu.html

regards, Micha

Jaminator · 31st October 2007, 09:21 AM

Hello folks,
Any theory about the bass bins ??
How does the horn in a bass bin help getting the right sound and which design is the most efficient ?

palesha · 7th November 2007, 03:20 PM

All horn based designs r efficient. U must know ur driver T/S parameters in details. Then decide what kind of frequency response u want. Accordingly u can select that matches ur driver or design ur own cabinet if can.

jaya000 · 7th November 2007, 03:23 PM

Be cautious before buying Paudio in India.
Many duplicates r there in the market.
Even original r with aluminium voice coil.
They hv complaints of voice coil burning in our hot atmosphere.
Cabinets r readily available in aamchi Mumbai.

dangus · 8th November 2007, 11:24 PM

You might want to look at the tapped horn thread. Construction looks simpler than normal horn designs. Also, model the driver as a bandpass; that may be good enough for sound reinforcement purposes.

29th October 2007, 09:12 AM	#1
Jaminator diyAudio Member Join Date: Sep 2007	How to make Bass bins Hello Folks, i have Just sucessfully built the M-250 Amp found in the community and now am planning to make 4 of them to get 1000 watts system. I am all set with the amplifiers. I am buying these PA speakers for these Amps http://www.paacoustic.com/Product_De...ctID=C18-600LF and wanna build Bass bins for these babies. First am confused on which design to choose, a Wbin or a cross bin. Can any experienced person help me with choosing the design and also how to make it.. i havent found any material to how thw wooden boxes of bins are made i mean the details of the angles and etc etc. Hoping for some help.

29th October 2007, 09:29 AM	#4
AKN Enjoy good sound diyAudio Member Join Date: Aug 2005 Location: In the middle of Sweden	Hi, Some W-bin plans here: http://www.dancetech.com/aa_dt_new/pa/pa-index.cfm (further down the page) __________________ / Anders

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A pair of Klipschorn Bass bins +	limono	Swap Meet	4	23rd October 2009 10:10 PM
Empty 18 inch scoop bass bins WANTED!!!	Bull	Swap Meet	4	2nd June 2005 02:05 AM
Bridging an H&H m900 (400w/ch@4ohm) to run two 16ohm H&H Bass Bins in parallel?	Ovation	Solid State	5	17th February 2005 11:36 PM
'reference' speakers idea (ribbons & sealed bass bins)	lucpes	Multi-Way	38	5th July 2004 12:13 AM
Community GGM Bass bins	tmc	Multi-Way	8	21st November 2002 09:36 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th October 2007, 09:16 AM	#2
MaVo diyAudio Member Join Date: Jan 2006 Location: Herne	there is info: http://www.speakerplans.com/

29th October 2007, 09:20 AM	#3
Jaminator diyAudio Member Join Date: Sep 2007	Hey that was a quick reply But i have seen this site... But W bin is missing and it doesnt have much details abut which to choose and all

30th October 2007, 03:39 PM	#5
Piek diyAudio Member Join Date: Oct 2006	Hi, http://members.aol.com/xxbase80a/menu.html regards, Micha

31st October 2007, 09:21 AM	#6
Jaminator diyAudio Member Join Date: Sep 2007	Hello folks, Any theory about the bass bins ?? How does the horn in a bass bin help getting the right sound and which design is the most efficient ?

7th November 2007, 03:20 PM	#7
palesha diyAudio Member Join Date: Nov 2001 Location: Pune India	All horn based designs r efficient. U must know ur driver T/S parameters in details. Then decide what kind of frequency response u want. Accordingly u can select that matches ur driver or design ur own cabinet if can.

7th November 2007, 03:23 PM	#8
jaya000 diyAudio Member Join Date: Dec 2006	Be cautious before buying Paudio in India. Many duplicates r there in the market. Even original r with aluminium voice coil. They hv complaints of voice coil burning in our hot atmosphere. Cabinets r readily available in aamchi Mumbai.

8th November 2007, 11:24 PM	#9
dangus diyAudio Member Join Date: May 2004 Location: Vancouver Island	You might want to look at the tapped horn thread. Construction looks simpler than normal horn designs. Also, model the driver as a bandpass; that may be good enough for sound reinforcement purposes.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)