|
Free subwoofer cabinet for collection
2 Attachment(s)
We've finished putting our sub woofer together and have no use for one of the early test bed cabinets that I constructed.
It's built from 25mm MDF braced internally at the corners but measuring in at 40cm[d] x 40cm[w] x 50cm[h] is quite rigid. There are cut-outs for driver and amp module, though with some deft routeing you could blank the hole / holes with 25mm MDF and cut out your own sizes. Currently it will accommodate a 12" [305mm] amp panel [Keiga KGND 52100] and a 12" driver [Shadow Works - Titan, Phantom, Bronze, Genesis] with cut-out 282mm and rebate 322mm It could possibly be finished with a bit of elbow grease and some TLC. Images below. Free to someone who will collect from OX9 3JF |
Sub on side
2 Attachment(s)
showing insides
|
Intended look
2 Attachment(s)
This gives you an idea of what the initial design was to look like using this cabinet.
|
lowball front
2 Attachment(s)
and here is the final cabinet design
|
lowball_top
2 Attachment(s)
top
|
one word: WoW :D
|
Grutz
Many thanks, it's been a long road but the results both sonically and visually exceeded our expectations by some margin ! I will hopefully have some proffesional photos done soon to post. |
| All times are GMT. The time now is 05:22 AM. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd. (Resources saved on this page: MySQL 30.00%)
Copyright ©1999-2013 diyAudio