diyAudio (
-   Subwoofers (
-   -   how to measure port centre line (

busterno1 25th September 2007 02:25 AM

how to measure port centre line
2 Attachment(s)
I am building this sub

but rabbit has done a redesign on it so it is a down firing port [ he is unavailable at the moment due to illness ]

my problem is how to measure the centre line to make sure the length is right

if its not right how do i change the length of it do i change the size of the corner pieces .

maybe i should just make it & hope for the best thanks for any help

Ron E 30th September 2007 01:13 PM

length is approx:

fudge would be due to the effect of the area under the enclosure, which is not super simple to predict. You pretty much need to cut and try. Moving the point of entry into the spiral is the only practical adjustment.

All times are GMT. The time now is 09:40 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2