Hello,
a new idea,
sub for 6,5" - 8" bass driver,
wall or corner standing,
30% transparent by making
the triangle front and back wall
in acryl 25 mm,
horn mouth side wall glueed with a mirror
combine with a lamp will get
a new look.
also possible to use the sidewalls
for books, CD etc.
top on the magnet a climbing plant
and you will in short time "never"
realize that´s a bass box.
a new idea,
sub for 6,5" - 8" bass driver,
wall or corner standing,
30% transparent by making
the triangle front and back wall
in acryl 25 mm,
horn mouth side wall glueed with a mirror
combine with a lamp will get
a new look.
also possible to use the sidewalls
for books, CD etc.
top on the magnet a climbing plant
and you will in short time "never"
realize that´s a bass box.
Attachments
nice flower pot..lol
the diagram was a bit tough to understand but nice,
i'll build one horn enclosure for sure in a year or 2, i think making a horn out of a bed or a table would give a lot of volume and a decent look
BTW can i use ordinary transparent window glass instead of acryl 25 mm with a small driver ....
PS..
climbing plant, with all that basss n boom plant on will surely rock
the diagram was a bit tough to understand but nice,
i'll build one horn enclosure for sure in a year or 2, i think making a horn out of a bed or a table would give a lot of volume and a decent look
BTW can i use ordinary transparent window glass instead of acryl 25 mm with a small driver ....
PS..
climbing plant, with all that basss n boom plant on will surely rock
Amit_112dB
Hello,
look better:
http://www.hm-moreart.de/95.htm
To get holes in the glass is expensive,
in my case normal glas would work
but min. 10mm thick.
Hello,
look better:
http://www.hm-moreart.de/95.htm
To get holes in the glass is expensive,
in my case normal glas would work
but min. 10mm thick.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.