diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Subwoofers (http://www.diyaudio.com/forums/subwoofers/)
-   -   Looking for a 8" Driver for Servo System (http://www.diyaudio.com/forums/subwoofers/102290-looking-8-driver-servo-system.html)

ptstv 22nd May 2007 08:20 AM

Looking for a 8" Driver for Servo System
 
Does anyone know of an 8" driver with feedback for a servo driven system? I would use a Rythmik driver (ideal), but I need something smaller for a particular application. Anything out there? Thanks.

nate 23rd May 2007 07:48 PM

I doubt that you will find much in the way of a servo 8 for diy use. The complexity of correctly implementing a servo circuit on an 8" driver is kind of wasted as the 8" will be limited in output by its size and the corrective nature of the servo.

Have you considered a small driver sealed system using a linkwitz transform circuit?? I just built my first LT sub and it is pretty cool. This has the potential to be much simpler than a full servo system and result in similar output.

nate


All times are GMT. The time now is 07:24 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2