Adire Audio Website - Error?

jdgonko · 27th April 2007, 01:51 AM

Hello. I've been visiting the Adire website from time to time and their Tumult webpage does not seem to allow for the viewing of the PDF file(s) which would provide the T/S params.

Nor do any of their other drivers' web pages for that matter! The mouse cursor does not change when hovering over what should be the PDF file links. I even sent them a message notifying them of the problem.

Does anyone have a link to a definitive site/page that will provide me with Adire Audio values? My intention is to build some sealed enclosures (Qts 0.707 flat) for two Tumult 12" drivers to see how they will sound in my 98 Jeep GC.

I'm a bit tired of the Infinity Basslinks that are in there currently. Or, I may just go with a couple of kappa perfect (TOL) Infinify sub drivers since I can get those T/S values.

After a lot of time modifying the Basslink combo response, I cannot seem to get enough accuracy for my taste. They're currently mounted vertically, up against the rear bench seat, firing towards the hatchback, to help eliminate any rear-wave passive radiator emissions. I prefer accuracy and deepness...then loudness if the price is still attainable! That's why I'm shooting for two Tumults in sealed enclosures as my new starting point. The Basslinks are really good but I'm ready for the next level...

Thanks for any help!
Joe

Mikey p · 27th April 2007, 02:38 AM

Tumult T/S
http://web.archive.org/web/200402022...ire/tumult.htm

jdgonko · 27th April 2007, 02:49 AM

Saweet! Thank you very much!
Joe

GM · 28th April 2007, 05:25 AM

Greets!

Are they even available?: http://www.acoustic-visions.com/~aco...ire_tumult_15/

GM

jdgonko · 30th April 2007, 01:28 AM

Good point there. That is the website I saw a few weeks ago when trying to get those T/S parameters from any place I could find. I thought they were just backordered but now I think something else is up, heh.

Did Adire go under or get bought?

Thanks again for any info.

GM · 30th April 2007, 02:57 AM

Greets!

Dunno, I've 'heard' various rumors, but nothing I'm confident of enough to pass along. All I know is that they have a long history of delivery problems and apparently everything they've done to improve turns sour for whatever reason.

Might want to consider these if the Tumult's not available: http://www.diymobileaudio.com/shop/p...products_id=32

GM

jdgonko · 30th April 2007, 04:28 AM

Thanks for the suggestion! I'll definitely check it out!

Also, your "Loud is Beautiful if it's Clean!" signature is most excellent. I've heard (or rather ENDURED) too many systems that are one tone only - loud and annoying... Believe me, when a system is both loud and accurate, I'm in awe that the owner did a proper job. My two bits...

27th April 2007, 01:51 AM	#1
jdgonko diyAudio Member Join Date: Dec 2005 Location: Minneapolis, MN	Adire Audio Website - Error? Hello. I've been visiting the Adire website from time to time and their Tumult webpage does not seem to allow for the viewing of the PDF file(s) which would provide the T/S params. Nor do any of their other drivers' web pages for that matter! The mouse cursor does not change when hovering over what should be the PDF file links. I even sent them a message notifying them of the problem. Does anyone have a link to a definitive site/page that will provide me with Adire Audio values? My intention is to build some sealed enclosures (Qts 0.707 flat) for two Tumult 12" drivers to see how they will sound in my 98 Jeep GC. I'm a bit tired of the Infinity Basslinks that are in there currently. Or, I may just go with a couple of kappa perfect (TOL) Infinify sub drivers since I can get those T/S values. After a lot of time modifying the Basslink combo response, I cannot seem to get enough accuracy for my taste. They're currently mounted vertically, up against the rear bench seat, firing towards the hatchback, to help eliminate any rear-wave passive radiator emissions. I prefer accuracy and deepness...then loudness if the price is still attainable! That's why I'm shooting for two Tumults in sealed enclosures as my new starting point. The Basslinks are really good but I'm ready for the next level... Thanks for any help! Joe

28th April 2007, 05:25 AM	#4
GM diyAudio Member Join Date: Jun 2003 Location: Chamblee, Ga.	Greets! Are they even available?: http://www.acoustic-visions.com/~aco...ire_tumult_15/ GM __________________ Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

30th April 2007, 02:57 AM	#6
GM diyAudio Member Join Date: Jun 2003 Location: Chamblee, Ga.	Greets! Dunno, I've 'heard' various rumors, but nothing I'm confident of enough to pass along. All I know is that they have a long history of delivery problems and apparently everything they've done to improve turns sour for whatever reason. Might want to consider these if the Tumult's not available: http://www.diymobileaudio.com/shop/p...products_id=32 GM __________________ Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For Sale Or Trade: Adire Audio Brahma, Rythmik Audio Plate Amp	tmort	Swap Meet	5	27th June 2009 12:29 AM
borbely audio website	Luke	Everything Else	6	26th October 2006 03:48 AM
Adire Tempest Whitepaper Error	seangoesbonk	Multi-Way	0	17th February 2003 06:42 AM
Adire Audio kit-81m	saletel	Multi-Way	1	11th January 2003 06:25 PM
New Car Audio Website!	Addicted2Audio	Multi-Way	0	20th March 2002 08:46 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th April 2007, 02:38 AM	#2
Mikey p diyAudio Member Join Date: Feb 2004 Location: Sask. Canada	Tumult T/S http://web.archive.org/web/200402022...ire/tumult.htm

27th April 2007, 02:49 AM	#3
jdgonko diyAudio Member Join Date: Dec 2005 Location: Minneapolis, MN	Saweet! Thank you very much! Joe

30th April 2007, 01:28 AM	#5
jdgonko diyAudio Member Join Date: Dec 2005 Location: Minneapolis, MN	Good point there. That is the website I saw a few weeks ago when trying to get those T/S parameters from any place I could find. I thought they were just backordered but now I think something else is up, heh. Did Adire go under or get bought? Thanks again for any info.

30th April 2007, 04:28 AM	#7
jdgonko diyAudio Member Join Date: Dec 2005 Location: Minneapolis, MN	Thanks for the suggestion! I'll definitely check it out! Also, your "Loud is Beautiful if it's Clean!" signature is most excellent. I've heard (or rather ENDURED) too many systems that are one tone only - loud and annoying... Believe me, when a system is both loud and accurate, I'm in awe that the owner did a proper job. My two bits...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read