PLS-226 Schematic

Tequila · 26th March 2007, 06:27 AM

Just traced the circuit of Mark Levinson Power Supply PLS-226. May be useful for anyone need to do some repairing of Diy a clone.

Hope it helps

Ymatsu · 30th April 2007, 03:20 PM

If you know, please teach me...

Adams_Leo · 4th May 2007, 05:05 AM

Quote:

Originally posted by Tequila
Just traced the circuit of Mark Levinson Power Supply PLS-226. May be useful for anyone need to do some repairing of Diy a clone.

Hope it helps

Hi Man,
Did you find the Mark 320S preamp circuit?I have got the 380S preamp sch,but it diffcult to clone due to it's very hard to get the parts.

regards
Leo

Tequila · 4th May 2007, 06:26 AM

Hi Ymatsu,

I never tried 100V, but from the circuit I traced, it should be A-E, B-F. May be you can confirm with Harmon Kardon Tech Support.

Hi Leo,
I am not familiar with ML 3x series, and I am a fan of the older 2x series.

Adams_Leo · 4th May 2007, 11:57 AM

Quote:

Originally posted by Tequila
Hi Ymatsu,

I never tried 100V, but from the circuit I traced, it should be A-E, B-F. May be you can confirm with Harmon Kardon Tech Support.

Hi Leo,
I am not familiar with ML 3x series, and I am a fan of the older 2x series.

Hi Tequila,
Sorry disturb you again,What about the ML26 preamp,Did you have this preamp Schematics?it's the best unit in preamp.

thanks
Leo

Tequila · 6th May 2007, 03:37 PM

I don't have 26 schematic now, but I do plan to trace it when I have some times. (May take months

)

But I don't suggest you to clone it. The cost of parts could be more expensive than just getting a second hand 26 from Ebay.

Adams_Leo · 6th May 2007, 09:27 PM

Quote:

Originally posted by Tequila
I don't have 26 schematic now, but I do plan to trace it when I have some times. (May take months )

But I don't suggest you to clone it. The cost of parts could be more expensive than just getting a second hand 26 from Ebay.

Yes,You are right.the parts very expensive,but the sounds very greate.do you think so?Also it's very diffcult to get second hand unit.what about Mark No.28?

sixtek · 6th May 2007, 10:07 PM

I could never understand why some person preferring those many MByte BMP's for a such simple B/W drawing...
I converted this 3.7 MByte schematic to GIF. I got a 38,9 KByte pic. Funny, isn't it?!

30th April 2007, 03:20 PM	#2
Ymatsu diyAudio Member Join Date: Apr 2007	Jumper setting for 100V If you know, please teach me...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
looking for a pre-amp schematic	steamPunk	Tubes / Valves	3	3rd August 2008 01:49 PM
DBX 500 schematic	d3imlay	Solid State	0	2nd August 2008 05:12 PM
F3 schematic	kenev	Pass Labs	2	24th January 2008 03:24 PM
Need Six-pac amp schematic	Sarge	Tubes / Valves	1	31st July 2004 08:30 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th May 2007, 06:26 AM	#4
Tequila diyAudio Member Join Date: Nov 2006	Hi Ymatsu, I never tried 100V, but from the circuit I traced, it should be A-E, B-F. May be you can confirm with Harmon Kardon Tech Support. Hi Leo, I am not familiar with ML 3x series, and I am a fan of the older 2x series.

6th May 2007, 03:37 PM	#6
Tequila diyAudio Member Join Date: Nov 2006	I don't have 26 schematic now, but I do plan to trace it when I have some times. (May take months ) But I don't suggest you to clone it. The cost of parts could be more expensive than just getting a second hand 26 from Ebay.

6th May 2007, 10:07 PM	#8
sixtek diyAudio Member Join Date: Jan 2007	I could never understand why some person preferring those many MByte BMP's for a such simple B/W drawing... I converted this 3.7 MByte schematic to GIF. I got a 38,9 KByte pic. Funny, isn't it?!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)