This is a MOSFET version of Stax-original shunt regulator, I use it
on my pre-amp @+/-28V and my power amp's driver stage @+/-47V with a little change, the CCS should use 2SK246Y instead of
LM334 for it only operates < 40V.
🙂
on my pre-amp @+/-28V and my power amp's driver stage @+/-47V with a little change, the CCS should use 2SK246Y instead of
LM334 for it only operates < 40V.
🙂
Vacuum State Electronics' Allen Wright in his SP-15_Article:
Secrets of the phono stage number 9
Use Shunt Regs!
He said that series regulators are a waste of time and do more harm than good,... 😱
SP-15_Article
Secrets of the phono stage number 9
Use Shunt Regs!
He said that series regulators are a waste of time and do more harm than good,... 😱
SP-15_Article
- Status
- Not open for further replies.