Post your Solid State pics here.

[VintageAmp]

Thanks,
your explaination would explain the lack of response. This is a complicated issue where a schematic would help. It does seem this amp is not very well known. Which thread would you recommend?

[fotios]

Originally posted by VintageAmp
Thanks,
your explaination would explain the lack of response. This is a complicated issue where a schematic would help. It does seem this amp is not very well known. Which thread would you recommend?

But it is obvious that Bonsai recommends you the Solid State forum in which is found this thread "Post your solid state pics here". You must open a new thread in this forum here, with your query. It is so simple!

[sakis]

my easter toy .....

constructed this as a joy excersize .....had fun doing it ....and nobody start yanking arround my transistors !!!!!! they are real ..... bought somewhere arround the 90's i still have about 120 pairs more he he he he

[sakis]

...... a very strange thing .... in this project used bc546 .... for ltp and curent source , ( matched pair with thermal junction ) which bc 546 i got from a shop i dont remember ( will track down though ) and the logo was : BC546-B and down under the number 351 was printed .

suprizingly all of them had a hfe of .......351 very very closly to each other .....

[sakis]

ready and working allright but it will have to freeze for a while before get ready to be a ready made device since no decent tip142-147 are found in the Greek market yet and then on the other hand i dont really wana go for cans ..... too much mechano to do that i am not up to these days

also another reason to freeze this is that the mosfet used for a current source is almost impossible to get ( as we speak only one resistor+cap is used ) so this part needs to be redesigned ....

the pcb is the original but i am actually tempted to make my own since i really dont like outputs wired to the pcb ..... this is something i would never do .....

regards sakis

PS .... it measures pretty fine but still havent heard anything from it ....i dont wana spoil my ears before everything very ready first ..... ha ha ha

[sakis]

my easter toy ....as a dual mono version

i apologize for the construction since most of the construction i make looks really nice but this particular one was originally builted as Legend 4 but failed .... for about 20 times and then reconstructed again and again and again till i decided to do something finally useful with it ....

here is the pictures and also scope readings ....with the first one at 10 khz and the second one .....at 100khz ..... nice baby heeee

[sakis]

scope readings at 10 khz

[sakis]

and scope readings at 100 khz ....

i like that .... very much i thing !!!!!!

[fotios]

Hi Sakis

×ñéóôïò Áíåóôç!
In the attached picture are my toys for Easter. In the left, a bottle of tsipouro (very good, its price is 10,5 euro/0,7Lt) in the middle a bottle of cold water, and in the right a can of home made tsipouro (gift to me).
Ahahaha!
For the foreigners in this post, the red egs are for cracking, a Greek custom of Easter.

Fotios

[sakis]

is having a better time i think !!!!!

best regards !!!

÷ñïíéá ðïëëá
÷ñéóôïò áíåóôç öéëå !!!!

the above is greek easter creetings !!!!