Sound Code System Amp Specs??

Zero Cool · 4th February 2007, 02:26 PM

Anyone have any info on the old SCS, Sound Code System amplifiers. i know they were Mosfet but i am looking for any kind of info on power ratings etc for the 2350 models.

Zc

ricksmastermix · 11th November 2010, 12:39 PM

Sound Code Systems amplifiers:

Mo. 2600A 350 wrms @ 8 ohms 600 wrms @ 4 ohms, 1200 wrms mono
Mo. 2450A 275 wrms @ 8 ohms 450 wrms @ 4 ohms, 900 wrms mono
Mo. 2350A 260 wrms @ 8 ohms 350 wrms @ 4 ohms, 700 wrms mono
Mo. 2150A 100 wrms @ 8 ohms 150 wrms @ 4 ohms, 300 wrms mono

Distortion = .01% THD/1 KHz, .025% IMD @ full power/8 ohms
Freq Response +0/-3db, 10Hz - 175KHz +0/-1db, 10Hz - 90KHz
Slew Rate = 70v/microsec
S/N Ratio = 95db, unweighted
Damping Factor = 350
Input impedence = 25Kohm/unbalanced, 7kohm/balanced

I have the schematics and parts list, if needed.

Rick

ettarleton · 14th November 2012, 04:19 AM

Hello Rick,
I see that you are in pocession of the SCS 2450a technical inforformation that I have searched high and low for. How would one go about getting such info??
I am new to this forum and I realize your post has some ace to it but I hope you still check in from time to time as you seem to be the only one on the net that has this info
Thanks
ettarleton

4th February 2007, 02:26 PM	#1
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	Sound Code System Amp Specs?? Anyone have any info on the old SCS, Sound Code System amplifiers. i know they were Mosfet but i am looking for any kind of info on power ratings etc for the 2350 models. Zc

11th November 2010, 12:39 PM	#2
ricksmastermix diyAudio Member Join Date: Nov 2010 Location: NE Georgia	SCS Specs Sound Code Systems amplifiers: Mo. 2600A 350 wrms @ 8 ohms 600 wrms @ 4 ohms, 1200 wrms mono Mo. 2450A 275 wrms @ 8 ohms 450 wrms @ 4 ohms, 900 wrms mono Mo. 2350A 260 wrms @ 8 ohms 350 wrms @ 4 ohms, 700 wrms mono Mo. 2150A 100 wrms @ 8 ohms 150 wrms @ 4 ohms, 300 wrms mono Distortion = .01% THD/1 KHz, .025% IMD @ full power/8 ohms Freq Response +0/-3db, 10Hz - 175KHz +0/-1db, 10Hz - 90KHz Slew Rate = 70v/microsec S/N Ratio = 95db, unweighted Damping Factor = 350 Input impedence = 25Kohm/unbalanced, 7kohm/balanced I have the schematics and parts list, if needed. Rick

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PA sound system	metaverse	Subwoofers	46	7th October 2008 05:27 PM
Problem witht [code]blah[/code] ?	elseif	Forum Problems	1	17th August 2008 12:30 AM
New sound system	djfatben	Multi-Way	16	17th December 2004 07:41 PM
Humble low cost computer monitor system...driver specs are killing me!	JinMTVT	Multi-Way	11	17th October 2004 10:52 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th November 2012, 04:19 AM	#3
ettarleton diyAudio Member Join Date: Jul 2012	Hello Rick, I see that you are in pocession of the SCS 2450a technical inforformation that I have searched high and low for. How would one go about getting such info?? I am new to this forum and I realize your post has some ace to it but I hope you still check in from time to time as you seem to be the only one on the net that has this info Thanks ettarleton