diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Carver PM 1.5 Amps (http://www.diyaudio.com/forums/solid-state/94550-carver-pm-1-5-amps.html)

sinniste 18th January 2007 07:34 PM

Carver PM 1.5 Amps
 
I've had a Carver PM 1.5 for years and it has served me well on the road as a professional musician. One problem I could never solve, however, was an annoying "buzz" whenever the amp is turned on (and connected to speakers). It sounds like a ground loop and occasionally I have had success by using a 2-prong adapter to lift the ground. It doesn't always work, though. I always make sure that the amp is plugged into the same power strip as the rest of my sound system also trying to avoid a loop. Is there anything else I can try? I have recnetly been using the amp in quieter settings and the buzz is really annoying. Any help would be much appreciated. Thank you.
Steve

TomWaits 18th January 2007 10:19 PM

service manual
 
Welcome to the forum Steve. This may be of help. Can you work on it yourself?

Cheers,

Shawn.


All times are GMT. The time now is 08:52 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2