cadsoft eagle 2 layer routing

djronbxs · 10th January 2007, 09:35 AM

hi,

does someone have an autorouter configuration for 2 layer routing one goes all directions and the other layer only for jumpers ?

thanks
ronald

pinkmouse · 10th January 2007, 11:37 AM

I would help if I could, but I have never used the autorouter, and to be honest, for audio, I never will.

djronbxs · 10th January 2007, 01:39 PM

so what you do for pcb ?

Pars · 10th January 2007, 01:42 PM

Route manually. You won't find a good autorouter (or so I've been told) until you get into expensive commercial layout software.

pinkmouse · 10th January 2007, 01:55 PM

I use the manual routing tools.

10th January 2007, 09:35 AM	#1
djronbxs diyAudio Member Join Date: May 2006	cadsoft eagle 2 layer routing hi, does someone have an autorouter configuration for 2 layer routing one goes all directions and the other layer only for jumpers ? thanks ronald

10th January 2007, 11:37 AM	#2
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	I would help if I could, but I have never used the autorouter, and to be honest, for audio, I never will. __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

10th January 2007, 01:55 PM	#5
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	I use the manual routing tools. __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cadsoft Eagle PCB tutorial thread discussion.	MiiB	Parts	7	8th October 2009 07:17 AM
Cadsoft Eagle PCB tutorial thread.	Nordic	Parts	5	3rd April 2008 09:09 PM
eagle routing	djronbxs	Everything Else	1	21st September 2007 06:45 PM
Eagle: Mirror bottom layer for Gerber files?	orthoefer	Everything Else	4	17th August 2006 12:38 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th January 2007, 01:39 PM	#3
djronbxs diyAudio Member Join Date: May 2006	so what you do for pcb ?

10th January 2007, 01:42 PM	#4
Pars diyAudio Member Join Date: Jan 2004 Location: Chicago	Route manually. You won't find a good autorouter (or so I've been told) until you get into expensive commercial layout software.

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read