diyAudio (
-   Solid State (
-   -   Passive EMI shielding? (

ROBSCIX 5th January 2007 05:29 PM

Passive EMI shielding?
Hello, If I had a small circuit I would like to shield from EMI, what could I use to do this? I don;t want some $100 solution. Thx for the info guys.

XEAGLEKEEPER 6th January 2007 03:41 AM

A earth grounded copper mesh or sheet around the circuit.should do the trick:)

unclejed613 6th January 2007 04:01 AM

if you need a small shielded box, you could make it out of unetched pc board material, and solder the edges together....

ROBSCIX 6th January 2007 04:40 PM

Somebody was telling me that anti-static bag-the type you get components and PC cards in would work but I am not sure. Any opinions on that?

tvi 6th January 2007 08:56 PM

anti-static bag?

Try sticking your mobile phone in one and watch the signal strengh meter, then ground the bag an see what happens.


ROBSCIX 6th January 2007 09:13 PM

What are you getting at that the gnd is the key to any sheilding? well I guess it would be. Thx

All times are GMT. The time now is 01:59 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio