I have not tried it, but the people who make the paper that you use for printing circuit boards claim that you can also use it to make a sort of decal that will serve for labels. Anything you can print on a laser printer or copy on a copier should be doable.
Try Mouser or Digikey for the paper.
Grey
Try Mouser or Digikey for the paper.
Grey
Printing material
There is a product called Quick mark imaging film, which exists both as plastic foils and metal foils, an excellent product for making decals and front panels. The product used to be called Scotchcal, then later 3M Dynamark. Not sure if Quick Mark is also a 3M product.
You make a master on film, PC and any drawing pgm, and copy the film to the foil like any other PCB. Then develop with the special deveopler, fix, and that's it. I have metal panels that have been used for more than 20 years ( Scothcal Alu-foil).
There is a product called Quick mark imaging film, which exists both as plastic foils and metal foils, an excellent product for making decals and front panels. The product used to be called Scotchcal, then later 3M Dynamark. Not sure if Quick Mark is also a 3M product.
You make a master on film, PC and any drawing pgm, and copy the film to the foil like any other PCB. Then develop with the special deveopler, fix, and that's it. I have metal panels that have been used for more than 20 years ( Scothcal Alu-foil).
I posted how I have made some laser transfer pcbs in this <a href="http://www.diyaudio.com/forums/showthread.php?threadid=676"><u>thread</u></a> it may be of help, cheak out the link in my post too.
Another option are the<a href="http://www.alps.co.jp/press/new1999/f0927-e.htm"><u> ALPS micro dry</u></a> or an inkjet printer and some of the <a href="http://www.starshipmodeler.com/reviews/pre_inkjet.htm"><u>decal kits</u></a> that are available in model making stores.
Regards
James
The links will open in your current browser window, you can select to open in a new window if you want.
Another option are the<a href="http://www.alps.co.jp/press/new1999/f0927-e.htm"><u> ALPS micro dry</u></a> or an inkjet printer and some of the <a href="http://www.starshipmodeler.com/reviews/pre_inkjet.htm"><u>decal kits</u></a> that are available in model making stores.
Regards
James
The links will open in your current browser window, you can select to open in a new window if you want.
Grey,
I have used the printed circuit board paper (actually the stuf I use is blue plastic sheets) to make decals and it works fine if you can get the metal hot enough to bond to the toner. It works best on thin sheet metal, I don't think you could get a thick aluminum panel hot enough using a household iron.
The image is quite durable as long as you don't try to create images with tiny dots (they will fall off with only minimal wear).
I have a color laser printer at work and it is great, I can make full color iron on decals for my boxes.
Phil Ouellette
I have used the printed circuit board paper (actually the stuf I use is blue plastic sheets) to make decals and it works fine if you can get the metal hot enough to bond to the toner. It works best on thin sheet metal, I don't think you could get a thick aluminum panel hot enough using a household iron.
The image is quite durable as long as you don't try to create images with tiny dots (they will fall off with only minimal wear).
I have a color laser printer at work and it is great, I can make full color iron on decals for my boxes.
Phil Ouellette
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.