Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Make up a laboratory from scratch.
Make up a laboratory from scratch.
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 27th December 2006, 07:16 PM   #1
Stefanoo is offline Stefanoo  Italy
diyAudio Member
 
Stefanoo's Avatar
 
Join Date: Apr 2006
Location: italia - ora USA -WI
Default make up a laboratory from scratch

Hi to everybody!

I need some of your important suggestion!
I'm willing to built in my house a little laboratory with all the necessaries things and instruments.

i would like to know,, according with yours diy's experience, what do you think is really needed.

Just skipping the obivious tools as screw drivers, tighter...and so on and so forth.....

i would like to hit the spat with an oscilloscope and other instruments that are really needed to be able to built your own project and stuff.

I would like specifically to know if it's possible to have an osilloscope and ... i don't know,....for instance something that measures the tdh+N (....with an output module to plug to the computer with a software...) and if those modules would be as effective as a dedicated oscilloscope.


I aware for your responces.


Thanks in advance.


Best regards,
Stefano.
__________________
Stefano
  Reply With Quote
Old 27th December 2006, 07:57 PM   #2
forr is offline forr  France
diyAudio Member
 
forr's Avatar
 
Join Date: Dec 2004
Location: Next door
My suggestion is that the first thing to have is a high quality and complete multimeter. I own one Metrix X56 (to sell) and two Metrix X57. I don't even use all the functions but some are very nice for audio work : peak, RMS, dB, Hz, Ohm, Farad.
  Reply With Quote
Old 27th December 2006, 08:14 PM   #3
Stefanoo is offline Stefanoo  Italy
diyAudio Member
 
Stefanoo's Avatar
 
Join Date: Apr 2006
Location: italia - ora USA -WI
yes i do agree!

How much for one of those?


I have seen on pass lab's section a similar post....about the distortion analyzer.
I didn't really understand if an external module for the coputer would be consider as effective or not.
I just fond UPV analyzer that looks great!

Does anybody have other ideas?

tanks.
__________________
Stefano
  Reply With Quote
Old 27th December 2006, 08:25 PM   #4
MaxS is offline MaxS  France
diyAudio Member
 
Join Date: Mar 2006
Location: France
Hello all,

Have a look here : http://bas.elitesecurity.org/mojiprojekti1.html
This site was made by one of our member Dr. Boraomega. You can find nice schematics as function generator, THDmeter, frequency counter or something like that.

Regards.
__________________
Ca marche pas ! Tu ne l' as pas branché non plus ....
  Reply With Quote
Old 27th December 2006, 10:15 PM   #5
prorms is offline prorms  United States
diyAudio Member
 
Join Date: Nov 2006
Send a message via ICQ to prorms
Default how about a circuit simulator

you might wana get a circuit simulator

circuit maker
multisim
orcad
superspice

they real help out alot
and are high accurate save alot time
student edition are good

when build circuit get a bread board and junction wires

do you know how to make circuit board
thier alot ways go about it

if you look for a muilti meter true rms
  Reply With Quote
Old 27th December 2006, 10:22 PM   #6
Zero Cool is offline Zero Cool  United States
diyAudio Member
 
Zero Cool's Avatar
 
Join Date: Sep 2004
Location: MN
A Variac is mondo important and i have a nice Fluke 189 Multimeter. When looking for RMS readings, make sure they state the frequency range the meter is accurate for. most meters are only accurate for 60 or 400hz rms and not for higher frequencies.

A bench power supply that is adjustable and regulated.

definitly a good scope. and a signal generator, function generator if you can.


This is where i would start for a lab.


Zc
  Reply With Quote
Old 27th December 2006, 10:32 PM   #7
forr is offline forr  France
diyAudio Member
 
forr's Avatar
 
Join Date: Dec 2004
Location: Next door
The function generator and the distometer of Maxs's link seem to be very similar to those published by Ian Hickman in Electronics World.

My most useful instruments are lab power supplies (home made, two 0 to 30 V, 1 to 3A, and two +/- 15 V) a little function generator (for most work, very low distorsion is not needed) and a scope.
  Reply With Quote
Old 28th December 2006, 01:45 AM   #8
steverb is offline steverb  New Zealand
diyAudio Member
 
Join Date: May 2003
Location: Ak
Look around for an old FETMETER , I bought 2 for about $10 each. Unlike digital meters they are good for measuring AC volts up to 100Khz, (digital meters give inaccurate AC volt measurements above approx 5Khz)

Also
signal generator
Dummy loads
An old speaker for testing that you dont mind blowing(just in case)
A descent bench light (often overlooked)
lots of cables/leads for meters & scopes
cables with alligator clips at the ends
An old scope is allways nice to have.
A handheld (digital) scope is great, I use it for the AC Voltmeter & freq meter, the actual scope display is too low res to be any use for audio.
__________________
The DIY bug. Nothing is ever finished.
  Reply With Quote
Old 28th December 2006, 03:31 AM   #9
TomWaits is offline TomWaits  Canada
diyAudio Member
 
TomWaits's Avatar
 
Join Date: Aug 2005
Location: Toronto
Make up a laboratory from scratch.
If you are building a space to work in, can you add a fan to vent air outside when necessary?

Shawn.
  Reply With Quote
Old 28th December 2006, 04:31 AM   #10
DigitalJunkie is offline DigitalJunkie  United States
diyAudio Member
 
Join Date: Apr 2003
Location: Portland,Oregon
Send a message via AIM to DigitalJunkie
Lots of outlets to plug your equipment into!

I've got a whole bench full of stuff,and only one power-strip to use.. 6 outlets just isn't enough,I need 6 more! Swapping plugs around,and trying to figure out which one is for the function generator is a hassle,in the middle of a project.

Then you realise you just unplugged your soldering station,and now have to wait for it to warm up again.
  Reply With Quote

Reply


Make up a laboratory from scratch.Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FOSTEX 300 laboratory power amp cybersniper Solid State 30 29th December 2017 08:26 PM
"Lux vita" banished from laboratory jackinnj Everything Else 2 24th October 2006 10:41 PM
Switched mode laboratory powersupply Danko Power Supplies 3 12th November 2005 09:20 PM
For sale: Tenma 72-6610 Laboratory DC Power Supply JAZZ2250 Swap Meet 0 18th September 2003 06:13 AM


New To Site? Need Help?

All times are GMT. The time now is 01:51 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki