Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 31st December 2002, 06:35 AM   #1
diyAudio Member
 
Join Date: Nov 2002
Location: Slovenia
Default Technics SU 8080

Hello !

Momentaly I'm repairing an solid state amp from Technics (SU 8080 from 1978). One channel has blown power tranzistors and drivers which are :

- 2SD 427 (TO 3)
- 2SB 557 (TO 3)
- 2SC 1913 (TO 220)
- 2SA 913 (TO 220)

I'm wondering if you could help me to find the best substitute to this obsolete tranzistors. I've looked in many catalogs but I hasn't found any. I must mention that I'm from Slovenia which is in Europe so I prefer any MJ, 2N device (easier to obtain).

Thanx in advance !

Cheers Boštjan
  Reply With Quote
Old 31st December 2002, 08:05 AM   #2
djdan is offline djdan  Romania
diyAudio Member
 
Join Date: Dec 2001
Location: Romania
MJ21193
MJ21194

MJE15030
MJE15031
  Reply With Quote
Old 2nd January 2003, 04:38 PM   #3
ppl is offline ppl  United States
diyAudio Member
 
ppl's Avatar
 
Join Date: Apr 2001
Location: Seattle, WA U.S.A.
That is a great Intergrated Amp. i used to have one of thouse and it replaced my cas1 and with the exception of not having as mutch guts the SU-8080 was cleaner and more detailed sounding.
The transistors that djdan is sugesting will work fine and also provide Better performance. the 2SA913 & 2AC1913 are High volt 300 Volt 1.5 Amp 15 MHz. devices and the 2SB and 2SD output devices are real slow and only 12 Amp. I would Keep that Amp It's Direct Coupled has a separate power supply including Transformers for each channel and was way ahead of its time as far as incorperating a high gain Power Amp section so when you have the Mode Via Tone or direct switched to direct the line level inputs are connected directly to the power amp input via the Volume control and bypasses the Internal preamp entierly. also the Output protection boards un plug so low impedance loads can be more readaly acomidated however at the risk of power transistors in the event of a shorted output.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
6528/8080 Triode - NOS Only ??? LinuksGuru Tubes / Valves 1 6th June 2009 11:05 PM
Technics SU-8080 andrepeeters Solid State 0 8th December 2008 07:36 PM
Skynet 8080 SMPS jonclancy Class D 5 5th May 2007 08:15 AM
How do I box a Skynet 8080 SMPS mod_sonic Class D 9 28th November 2005 11:57 PM
The latest FM tuner Shootout review is up: Technics ST-8080 3moons Analogue Source 0 7th June 2004 04:37 AM


New To Site? Need Help?

All times are GMT. The time now is 08:07 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2