Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

how to isolate input ground?
how to isolate input ground?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 17th December 2006, 10:11 PM   #1
Zero Cool is offline Zero Cool  United States
diyAudio Member
Zero Cool's Avatar
Join Date: Sep 2004
Location: MN
Default how to isolate input ground?

I need to build a simple opamp based preamp/buffer for an automotive project.

The Buffer is going to be used to interface an MP3 player to a car stereo. the problem is, a ground loop is created when the charger is plugged into the MP3 player as well.

Now the ugly cheap and easy solution is a radio shack ground loop isolator. yuck.

I need to come up with a better solution to do this.

The audio coming out of the MP3 player is unbalanced with a common ground. I have balanced inputs available going into the car stereo, or it can be used unbalanced. The radio shares ground with power, data and audio internally.

I dont have much room inside the case to hang iron and getting small, high quality iron is difficult and costly. so i am looking for some other solution.

Can i simply tie the opamp input neg side to ground through a 100 ohm resistor? Would that be enough to break the ground loop? I thought i had seen that done elsewhere. But wouldnt noise on the ground line then inject noise into the neg side of the opamp?

Help would be greatly appreciated.

  Reply With Quote


how to isolate input ground?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
how to isolate USB/audio ground?? audiomodder Parts 11 29th July 2009 09:26 PM
Car amp design, differential input, ground Davide82 Car Audio 11 12th November 2008 07:41 PM
Parallel LM3886, input ground, power ground, safety resistor and oscillations. markiemrboo Chip Amps 5 9th August 2007 03:50 PM
input connection and ground on ucd 180 bcrazy Class D 2 21st March 2007 04:23 PM

New To Site? Need Help?

All times are GMT. The time now is 09:13 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio