How I Can Bridge This Power Amplifier???
 

anybody has know how i can bridge the mosfet power amplifer AV-800????, i have the schematic diagram

Hi Broka

Details On how to bridge the AV800 are in the latest Assembly Manual.
Plus many other enhancements made in the last few years.

It's very easy You will notice that the Av800 has Balanced Inputs
All you have to do is use the Inverting input of AMP A and Non-Inverting input of AMP B and the load is driven across the Active Outputs of each each channel and you have a Bridged AV800.
Your should get around 1800 watts with a 2KVA supply into 8 Ohms. From memory when I did that test I only used 80 volts supply.

BRIDGING AV-800
 

for this shematics

http://www.diyaudio.com/forums/showt...0&pagenumber=1

your you could be but I specify??
put on your that i have 2 power av800...(with respect to the schematic ones previous), you can make a schematic???for i can to understand your idea...thanks