Amplifier Av-800

broka · 2nd December 2006, 07:20 PM

SOMEDBODY have a schematic for power Amplifier AV-800???...
thanks

Corax · 4th December 2006, 11:42 AM

Hi,

just in case you're still looking for the schematic of the AV-800 amplifier, here you'll find it attached.

Greetings

Corax

broka · 4th December 2006, 03:55 PM

you have the schematic of AV-800??, a looking for that amplifier, i'm very interesting for make this amplifier

Corax · 5th December 2006, 08:12 AM

hi broka,

I thought I already mailed the PDF with my last mail to you. Unfortunately I did not recognized the 'tiny' text at "Attach file:" which states a maximum size of 102400 bytes for the attachment and guess what ... - the file I tried to send you was 169 kbyte - sorry for that.

Now I've divided the PDF in 4 parts (the update version 03022004) plus the older version (22022001) which comes with this mail right away.

I hope you get lucky with it ;-)

Corax · 5th December 2006, 08:13 AM

Now the first part of the updated 03022004.

Corax · 5th December 2006, 08:14 AM

Now the second part of the updated 03022004.

Corax · 5th December 2006, 08:16 AM

Now the third part of the updated 03022004.

Corax · 5th December 2006, 08:17 AM

And finally the fourth and last part of the updated 03022004.

Enjoy building that amp.

Greetings

Corax

edl · 5th December 2006, 11:40 AM

Hey, it's copyrighted!

Corax · 5th December 2006, 03:40 PM

It was (as far as I remember) officially downloadable from his early homepage (two years ago I guess, because of the date for the updated version). I didn't changed a thing on the documentation except that I "disassembled" the PDF to post it here caused by the 102400 byte limit and I never received or downloaded it via any illegal paths or from illegal sources. So everybody could have downloaded it all by himself.
Besides, if anyone would himself calculate the prices for the kits Anthony E. Holton sells he would figure out that it would cost less money to buy the kit from him and get in addition a professional made pcb.
To have a schematic and a description is one thing - to make a good pcb, select the right components and finally a stable running amp is something totally different. Therefore I heavily recommend to everybody to support Anthony for his good work for the DIY community and if anyone decided to build his amp(s) (i.e. based on the schematics and therefore on Anthony's design) he should in deed consider to buy his kits.

Greetings

Corax

2nd December 2006, 07:20 PM	#1
broka diyAudio Member Join Date: Sep 2006	Amplifier Av-800 SOMEDBODY have a schematic for power Amplifier AV-800???... thanks

4th December 2006, 03:55 PM	#3
broka diyAudio Member Join Date: Sep 2006	av-800 you have the schematic of AV-800??, a looking for that amplifier, i'm very interesting for make this amplifier

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanted: DIY amplifier builder with experience. I need a 0.7 ohm stable amplifier	Audiophilenoob	Swap Meet	34	16th May 2005 11:58 PM
Questions about how to decrease the PASS A-40 amplifier into a class AB amplifier.	novtango	Pass Labs	2	21st October 2002 01:50 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th December 2006, 11:42 AM	#2
Corax diyAudio Member Join Date: Feb 2005 Location: south of lower saxon	Hi, just in case you're still looking for the schematic of the AV-800 amplifier, here you'll find it attached. Greetings Corax

5th December 2006, 11:40 AM	#9
edl diyAudio Member Join Date: Oct 2004	Hey, it's copyrighted!

5th December 2006, 03:40 PM	#10
Corax diyAudio Member Join Date: Feb 2005 Location: south of lower saxon	It was (as far as I remember) officially downloadable from his early homepage (two years ago I guess, because of the date for the updated version). I didn't changed a thing on the documentation except that I "disassembled" the PDF to post it here caused by the 102400 byte limit and I never received or downloaded it via any illegal paths or from illegal sources. So everybody could have downloaded it all by himself. Besides, if anyone would himself calculate the prices for the kits Anthony E. Holton sells he would figure out that it would cost less money to buy the kit from him and get in addition a professional made pcb. To have a schematic and a description is one thing - to make a good pcb, select the right components and finally a stable running amp is something totally different. Therefore I heavily recommend to everybody to support Anthony for his good work for the DIY community and if anyone decided to build his amp(s) (i.e. based on the schematics and therefore on Anthony's design) he should in deed consider to buy his kits. Greetings Corax

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)