Help me design a pcb for redcircuits 10 watt amp..
I am no good in pcb designing and I want a layout for the below amp...
If anyone knows how to design a good pcb Please make one for me..
Re: Help me design a pcb for redcircuits 10 watt amp..
As the amplifier is a simple one why not hard wire the components together as shown in the schematic. That way you would not need a pcb.
If you do hardwire the components together do connect all the grounds of one channel to one point as mentioned in the notes and then connect that one point to the central ground point on the power supply.
Also as mentioned in the notes some of the components need to be connected to a heatsink.
Try building something.
I forgot to mention the Mini Quasi .
Very easy build on this one, compact and easy parts to shop for. Contact the author of that thread, he is a wonderful person and he likes to help.
|All times are GMT. The time now is 03:52 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio