|12th November 2006, 08:22 AM||#1|
Join Date: Nov 2005
i have some pics of unwell pioneer
Here are some pics of the pioneer there are parts missing out of the board which i have done to test,i took all the relays out because the rapid clicking got annoying after a while.
The 2 grey resistors are okay,1.2 k and 1.8 k these drop the volts from 39 vdc to 30 vdc ,+ and - ,then they are drop again for preamp stages through the psu at the side of the 2 15000mf psu caps,preamp rails being +16vdc and - 12.5vdc.
there has been a repair on this amp before there are 4 teapo caps 10mf 100v which have been put in a zener diode by the side of the left psu cap was bust im guessing it is 33v because there is another on - rail.
All of these parts are in the supply to the left of the main psu caps,apologies for rubbish pics.
I really need some help on this one as soon as you press the direct button on front panel amp stays on.............
Any help would be fantastic.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Pics of modded pioneer TT||Zero One||Analogue Source||3||12th November 2006 11:30 PM|
|Pinoy DiY'ers, FT1600 pics..pics||dranreb&*||Full Range||5||3rd November 2004 10:21 PM|
|PICS: GainClone Monoblock pics||Rarkov||Chip Amps||19||17th April 2003 07:37 AM|
|New To Site?||Need Help?|