Nice results!
Thanks Netlist!
What SIM software are you using? I cannot identify it (I'm usig Tina, Multisim (aka EWB) and Simmetrix).
And it never caused any instabilty at PL-700? 99% of amps have bypass cap on the board.
Maybe it would be a possible upgrade of PL-700 to solder caps on the amp PCB?
Thanks Netlist!
What SIM software are you using? I cannot identify it (I'm usig Tina, Multisim (aka EWB) and Simmetrix).
In real life, PL only use two big capacitors, not bypassed.
And it never caused any instabilty at PL-700? 99% of amps have bypass cap on the board.
Maybe it would be a possible upgrade of PL-700 to solder caps on the amp PCB?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.