**** amplifier for party is not working!

Destroyer OS. · 31st October 2006, 06:30 PM

I have isolated a problem to my amplifier as best as I can. The only other thing that could cause this would be the cable.

Basically at most volume everything is fine. However as I increase the volume the right channel gets more and more distortion and eventually is MUCH quieter than the left channel.

Inside the amplifier I see no blown capacitors. I smell nothing burning. I really am not sure what the problem is! I checked to see if anything was touching anything else and I see nothing...

Any ideas? I was hoping to use it for a party tonight...

anatech · 31st October 2006, 07:18 PM

Hi Destroyer OS.,
What make and model amplifier is it??

-Chris

Edit: I deleted your duplicate post.

Destroyer OS. · 31st October 2006, 07:48 PM

Rotel RX-203

I gutted everything in the signal path. Signal goes straight to amplification.

anatech · 31st October 2006, 08:26 PM

Hi Destroyer OS.,
I don't have that manual, sorry. Hopefully another member can help you out with this.

-Chris

31st October 2006, 06:30 PM	#1
Destroyer OS. diyAudio Member Join Date: Nov 2005	**** amplifier for party is not working! I have isolated a problem to my amplifier as best as I can. The only other thing that could cause this would be the cable. Basically at most volume everything is fine. However as I increase the volume the right channel gets more and more distortion and eventually is MUCH quieter than the left channel. Inside the amplifier I see no blown capacitors. I smell nothing burning. I really am not sure what the problem is! I checked to see if anything was touching anything else and I see nothing... Any ideas? I was hoping to use it for a party tonight...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yamaha A720 amplifier not working	jlbosch	Solid State	18	27th February 2012 09:28 PM
HPPA Amplifier not working	flacer	Solid State	14	30th June 2009 02:36 PM
FS: a/d/s Ph15 amplifier - 50% working - $50	owdi	Swap Meet	4	28th September 2007 04:24 PM
no working amplifier	Diogo	Solid State	31	31st October 2002 05:58 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st October 2006, 07:18 PM	#2
anatech diyAudio Moderator Join Date: Jun 2004 Location: Georgetown, On	Hi Destroyer OS., What make and model amplifier is it?? -Chris Edit: I deleted your duplicate post.

31st October 2006, 07:48 PM	#3
Destroyer OS. diyAudio Member Join Date: Nov 2005	Rotel RX-203 I gutted everything in the signal path. Signal goes straight to amplification.

31st October 2006, 08:26 PM	#4
anatech diyAudio Moderator Join Date: Jun 2004 Location: Georgetown, On	Hi Destroyer OS., I don't have that manual, sorry. Hopefully another member can help you out with this. -Chris

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)