What to do with some spare parts

jerluwoo · 5th October 2006, 06:38 AM

Any ideas what to do with 8 mtp36n06v 's and an old marantz transformer from the 22xxb line of recievers that has +/- 53 volt(retified dc already) outputs?

datasheet for these mosfets can be found here

http://www.datasheets.org.uk/search....ExactDS=Starts

djk · 5th October 2006, 08:15 AM

The transistors are not particularly useful for much of anything. That's fine though, the transistors are one of the lowest cost things in an amplifier. Put them on the shelf.

The transformer is quite nice. Depending on the toplolgy of the output stage you choose, it should drive between 60W~100W per channel at 8 ohms.

5th October 2006, 06:38 AM	#1
jerluwoo diyAudio Member Join Date: Feb 2006 Location: Ashland,Ky U.S	What to do with some spare parts Any ideas what to do with 8 mtp36n06v 's and an old marantz transformer from the 22xxb line of recievers that has +/- 53 volt(retified dc already) outputs? datasheet for these mosfets can be found here http://www.datasheets.org.uk/search....ExactDS=Starts

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bass amp from spare parts	Chaos5522	Tubes / Valves	19	11th April 2009 03:39 PM
Technics spare parts	sakis	Solid State	0	26th January 2009 01:14 PM
I need spare parts to........	boboo	Vendor's Bazaar	0	1st March 2008 11:18 PM
PMD-100 spare parts OFFER...	Zoran	Digital Source	20	3rd September 2007 03:18 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th October 2006, 08:15 AM	#2
djk diyAudio Member Join Date: Feb 2001 Location: USA	The transistors are not particularly useful for much of anything. That's fine though, the transistors are one of the lowest cost things in an amplifier. Put them on the shelf. The transformer is quite nice. Depending on the toplolgy of the output stage you choose, it should drive between 60W~100W per channel at 8 ohms.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)