Adding spice models to SwitcherCAD...

JoeBob · 17th December 2002, 02:28 AM

Alright I've been able to add spice models to SwitcherCAD III before, but when I went to add the IRF610 model from IRF http://www.irf.com/product-info/models/SPICE/irf610.spi I have no clue how to add it to the file since it's not like the other entries. If anyone knows how to enter it or knows where I can obtain a model that works with SwitcherCAD I'd greatly apreciate it, thanks alot.

sonnya · 20th December 2002, 05:58 AM

i write a comment later on that. it is fairly simple when you have figured it out!

Sonny

sonnya · 20th December 2002, 06:14 AM

every time you have a line like this :

.MODEL MD D IS=1.6866e-09 RS=0.0538695 N=1.49978 BV=200
+IBV=0.00025 EG=1.2 XTI=4 TT=0
+CJO=1.59879e-10 VJ=2.42435 M=0.605977 FC=0.5

it should have a '(' right after model type and ')' in the end.

.MODEL MD D (IS=1.6866e-09 RS=0.0538695 N=1.49978 BV=200
+IBV=0.00025 EG=1.2 XTI=4 TT=0
+CJO=1.59879e-10 VJ=2.42435 M=0.605977 FC=0.5)

And be shure that there is a space (ascii value 32) between each parameter!

I hope it helps

17th December 2002, 02:28 AM	#1
JoeBob diyAudio Member Join Date: Nov 2001 Location: Montreal, Canada	Adding spice models to SwitcherCAD... Alright I've been able to add spice models to SwitcherCAD III before, but when I went to add the IRF610 model from IRF http://www.irf.com/product-info/models/SPICE/irf610.spi I have no clue how to add it to the file since it's not like the other entries. If anyone knows how to enter it or knows where I can obtain a model that works with SwitcherCAD I'd greatly apreciate it, thanks alot.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spice models	stinius	Solid State	0	18th November 2008 09:07 PM
new spice models available	Joel	Tubes / Valves	31	7th April 2006 05:10 PM
spice models	Zoran	Solid State	11	17th September 2005 02:03 PM
Spice Models	ACR	Solid State	4	13th September 2003 04:59 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th December 2002, 05:58 AM	#2
sonnya diyAudio Member Join Date: Oct 2001 Location: Denmark	i write a comment later on that. it is fairly simple when you have figured it out! Sonny

20th December 2002, 06:14 AM	#3
sonnya diyAudio Member Join Date: Oct 2001 Location: Denmark	every time you have a line like this : .MODEL MD D IS=1.6866e-09 RS=0.0538695 N=1.49978 BV=200 +IBV=0.00025 EG=1.2 XTI=4 TT=0 +CJO=1.59879e-10 VJ=2.42435 M=0.605977 FC=0.5 it should have a '(' right after model type and ')' in the end. .MODEL MD D (IS=1.6866e-09 RS=0.0538695 N=1.49978 BV=200 +IBV=0.00025 EG=1.2 XTI=4 TT=0 +CJO=1.59879e-10 VJ=2.42435 M=0.605977 FC=0.5) And be shure that there is a space (ascii value 32) between each parameter! I hope it helps

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)