bora's legend amp pcb layout

Flavio88 · 26th September 2006, 06:24 PM

hi everybody
i'm starting to build this project and before drawing my pcb layout i want to ask if someone have a ready to print layout for saving time...

someone have that???

waiting for replyes

Bone · 26th September 2006, 07:38 PM

Why not check out Bora's web site first!

http://bas.elitesecurity.org/mojiprojekti1.html

There's a pdf of one on there.

See http://bas.elitesecurity.org/legendpcb.pdf

Tony

Flavio88 · 26th September 2006, 10:01 PM

i tryed to register in his site and i'm waiting for e-mail reply...
but if you have also the components side of the projects please post it and i solve all my problems.
thanks for the help...

Leolabs · 27th September 2006, 01:50 AM

Nice website.

viktor1986 · 27th September 2006, 11:40 AM

Quote:

Originally posted by Flavio88
i tryed to register in his site and i'm waiting for e-mail reply...
but if you have also the components side of the projects please post it and i solve all my problems.
thanks for the help...

The components side you can find here http://www.bas.plumts.com/legend4rasp.gif

nazirdigi · 26th March 2011, 01:10 PM

Quote:

Originally Posted by viktor1986

The components side you can find here http://www.bas.plumts.com/legend4rasp.gif

hi victor

which pcb is this? can u share the layout.

viktor1986 · 26th March 2011, 05:46 PM

That is on old version. All the latest files you have here:

http://bas.elitesecurity.org/leg-LAY.gif

http://bas.elitesecurity.org/leg-stage_masterPCB.pdf

http://bas.elitesecurity.org/LEGEND-basic.gif

nazirdigi · 27th March 2011, 05:27 AM

Quote:

Originally Posted by viktor1986

That is on old version. All the latest files you have here:

http://bas.elitesecurity.org/leg-LAY.gif

http://bas.elitesecurity.org/leg-stage_masterPCB.pdf

http://bas.elitesecurity.org/LEGEND-basic.gif

for two pair output how much dc voltage need.?
can i use irfp260?

viktor1986 · 27th March 2011, 07:51 AM

Quote:

Originally Posted by nazirdigi

for two pair output how much dc voltage need.?
can i use irfp260?

It is written in schematic. If you do not see that, it's +/-50V DC. I think it should not be used IRFP260,IRFP260 have significantly higher capacities than the IRFP240 and it is possible that you will have problems.

nazirdigi · 27th March 2011, 11:01 AM

Quote:

Originally Posted by viktor1986

It is written in schematic. If you do not see that, it's +/-50V DC. I think it should not be used IRFP260,IRFP260 have significantly higher capacities than the IRFP240 and it is possible that you will have problems.

see this image here use irfp260.

26th September 2006, 06:24 PM	#1
Flavio88 diyAudio Member Join Date: May 2005 Location: Roma	bora's legend amp pcb layout hi everybody i'm starting to build this project and before drawing my pcb layout i want to ask if someone have a ready to print layout for saving time... someone have that??? waiting for replyes

26th March 2011, 05:46 PM	#7
viktor1986 diyAudio Member Join Date: Jun 2005 Location: Belgrade, Serbia	That is on old version. All the latest files you have here: http://bas.elitesecurity.org/leg-LAY.gif http://bas.elitesecurity.org/leg-stage_masterPCB.pdf http://bas.elitesecurity.org/LEGEND-basic.gif __________________ Pa mislim sta reci!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bora is a nice guy from Serbia - Yugoslávia	destroyer X	Solid State	723	8th May 2012 02:46 PM
bora's legend 4 consideartions	sakis	Solid State	6	24th May 2010 08:33 PM
bora's legend 8 legend 4	sakis	Solid State	0	8th March 2007 01:25 PM
thanks BORA !!!!	sakis	Solid State	2	1st March 2007 03:47 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

26th September 2006, 07:38 PM	#2
Bone diyAudio Member Join Date: Jun 2004 Location: Dorset, UK	Why not check out Bora's web site first! http://bas.elitesecurity.org/mojiprojekti1.html There's a pdf of one on there. See http://bas.elitesecurity.org/legendpcb.pdf Tony

26th September 2006, 10:01 PM	#3
Flavio88 diyAudio Member Join Date: May 2005 Location: Roma	i tryed to register in his site and i'm waiting for e-mail reply... but if you have also the components side of the projects please post it and i solve all my problems. thanks for the help...

27th September 2006, 01:50 AM	#4
Leolabs diyAudio Member Join Date: Dec 2004 Location: Bukit Mertajam	Nice website.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)