Cases for the Simple Killer Amp from Greg

RAW · 6th September 2006, 05:11 PM

Ok guy's how about putting up a few links of cases suppliers.

Found a few but not what I wanted to use for my 150 set from Greg.

Thanks
Al

HiFiddle · 8th September 2006, 12:25 AM

Greg built a great case for my dual mono GB150D - pictured below.

It's compact at only 300mm wide by 75mm high.

RAW · 8th September 2006, 08:23 PM

http://www.thlaudio.com/indexE.htm

http://www.atiresearch-anodized.com/products.html

http://www.hifi2000.it/default.asp?Langid=1

http://www.machmat.com/sales/chassis.htm

OK this is a few I have found.
Any others .

jaycee · 8th September 2006, 10:51 PM

Those cases from ATI look very nice.... it's a pity they don't mention prices anywhere - I can bet they cost a fortune!

I would like to try making my own case, but just cannot find anywhere in the UK that would sell a DIYer suitable metal stock.

RAW · 10th September 2006, 06:33 AM

ATI-679M 1 unit = $165 USD

Shipped by Express mail = $139 USD

Total amount = $304 USD

This is a single case shipped to Vancouver Canada.

And as it turns out Greg knows the owner Arthon from years ago.

Not cheap by any means but comes pre machined rear plate plus the power button.

The others I still have not not a reply back for shipping costs.
Arthon has responded to every email.

AndrewT · 10th September 2006, 08:00 AM

Hi,
I can thoroughly recommend ATI.
Arthon replies.
Cases look good
Packaging is excellent.
Prices are ultra competitive.

I got 8 delivered by slow boat at an average of £25.
All of the rounded corner style which are his lower priced range.

RAW · 12th September 2006, 06:02 PM

Thanks Andrew.
Sounds like ATI may be the way to go as well.

But and a BIG BUT

A little hint from down under, pointed to some darn fine works of art in cases that just may show up not that far down the road.

The look is very well done and style that is shocking.

Wait and see

We just may have the 150's in our room at RMAF in October

cOz · 13th September 2006, 01:46 AM

I wonder if we could do a group buy on that ATI 679M????

RAW · 13th September 2006, 01:48 AM

The price drops yes with more and the shipping is cheaper if sent by boat.

Time frame on the water 4-6weeks.
Over all up to 2 months if sent over the water after they clear customs ect.

6th September 2006, 05:11 PM	#1
RAW diyAudio Member Join Date: Jul 2002 Location: British Columbia ,Canada	Cases for the Simple Killer Amp from Greg Ok guy's how about putting up a few links of cases suppliers. Found a few but not what I wanted to use for my 150 set from Greg. Thanks Al

10th September 2006, 08:00 AM	#6
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	Hi, I can thoroughly recommend ATI. Arthon replies. Cases look good Packaging is excellent. Prices are ultra competitive. I got 8 delivered by slow boat at an average of £25. All of the rounded corner style which are his lower priced range. __________________ regards Andrew T.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simple Killer Amp!	amplifierguru	Solid State	347	8th November 2006 11:38 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th September 2006, 08:23 PM	#3
RAW diyAudio Member Join Date: Jul 2002 Location: British Columbia ,Canada	http://www.thlaudio.com/indexE.htm http://www.atiresearch-anodized.com/products.html http://www.hifi2000.it/default.asp?Langid=1 http://www.machmat.com/sales/chassis.htm OK this is a few I have found. Any others .

8th September 2006, 10:51 PM	#4
jaycee diyAudio Member Join Date: Apr 2004 Location: Norwich, UK	Those cases from ATI look very nice.... it's a pity they don't mention prices anywhere - I can bet they cost a fortune! I would like to try making my own case, but just cannot find anywhere in the UK that would sell a DIYer suitable metal stock.

10th September 2006, 06:33 AM	#5
RAW diyAudio Member Join Date: Jul 2002 Location: British Columbia ,Canada	ATI-679M 1 unit = $165 USD Shipped by Express mail = $139 USD Total amount = $304 USD This is a single case shipped to Vancouver Canada. And as it turns out Greg knows the owner Arthon from years ago. Not cheap by any means but comes pre machined rear plate plus the power button. The others I still have not not a reply back for shipping costs. Arthon has responded to every email.

12th September 2006, 06:02 PM	#7
RAW diyAudio Member Join Date: Jul 2002 Location: British Columbia ,Canada	Thanks Andrew. Sounds like ATI may be the way to go as well. But and a BIG BUT A little hint from down under, pointed to some darn fine works of art in cases that just may show up not that far down the road. The look is very well done and style that is shocking. Wait and see We just may have the 150's in our room at RMAF in October

13th September 2006, 01:46 AM	#8
cOz diyAudio Member Join Date: Dec 2004 Location: Houston	I wonder if we could do a group buy on that ATI 679M????

13th September 2006, 01:48 AM	#9
RAW diyAudio Member Join Date: Jul 2002 Location: British Columbia ,Canada	The price drops yes with more and the shipping is cheaper if sent by boat. Time frame on the water 4-6weeks. Over all up to 2 months if sent over the water after they clear customs ect.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)