Allegro preamplifier by Dr. Borivoje Jagodic
I am writing this to contribute and inform DIY community about another
design by Dr. Bora Jagodic.It is about his preamplifier design named
"Allegro" that has been built and tested by me. This days I've finished preamplifier Allegro according
to schematics from Borivoje Jagodic. You can find that schematic on his
Here is how it looks today:
DIRECT mode-----no limit
BYPASS mode----10Hz-108KHz ( -1dB)
TONE mode ------14Hz-87.5KHz (1dB; control "flat")
> THD (20KHz 1V rms output)
DIRECT mode---- not measured
TONE mode ------<0.0026%
> TONE CONTROL
BAS----------------±12dB on 50Hz
TREBLE----------- ±12dB on 10KHz
DIRECT mode------ not measured
TONE mode --------100dB (or best)
sooo....what about the sound; why didn't You use a better cable for the output from the preamplifier; why didn't You use better potentiometer......
what is the rest of the system in where it is playing.......
i was allways interested in NExxxx but never built some.....
|All times are GMT. The time now is 10:33 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio