Carver M 400 Specs
Carver M 400 Specifications:
Power output: 201 watts/channel into 8 ohms, 20Hz-20K Hz with no more than .05% THD;
Power at Clipping 250 watts/channel into 8 ohms at IK Hz, 300 watts into 4 ohms at lK Hz.
Bridged power 500 watts RMS into 8 ohms single channel.
Noise: >100 dB, IHF "A" weighting
IM distortion: 0.1% SMPTE
Input impedance: 100 K ohms
Speaker Load impedance: Recommended for driving speakers from 2 to 32 ohms.
Power consumption: 35 watts idle, 1500 watts full power.
Slew Rate: Greater than 200.
Dimensions: 7" high, 7" wide, 7" deep.
Carver M 400 Specifications:
Power output: 201 watts/channel into 8 ohms, 20Hz-20K Hz with no more than .05% THD;
Power at Clipping 250 watts/channel into 8 ohms at IK Hz, 300 watts into 4 ohms at lK Hz.
Bridged power 500 watts RMS into 8 ohms single channel.
Noise: >100 dB, IHF "A" weighting
IM distortion: 0.1% SMPTE
Input impedance: 100 K ohms
Speaker Load impedance: Recommended for driving speakers from 2 to 32 ohms.
Power consumption: 35 watts idle, 1500 watts full power.
Slew Rate: Greater than 200.
Dimensions: 7" high, 7" wide, 7" deep.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.