dual center tap rectifier replacement - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 29th July 2006, 06:03 AM   #1
diyAudio Member
 
Join Date: Oct 2005
Default dual center tap rectifier replacement

any soft recovery replacement the IRF16JPF and IRF16CPF series to-247 rectifiers, having a hard time finding both pos. and neg. output pairs !
  Reply With Quote
Old 29th July 2006, 07:38 AM   #2
AndrewT is online now AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Hi,
IR do not have these device numbers in their product search.

Check your numbers.
__________________
regards Andrew T.
  Reply With Quote
Old 29th July 2006, 03:06 PM   #3
diyAudio Member
 
Join Date: Oct 2005
irf 16cpf10 and irf 16jpf10 , late night post ! thx. andrew
  Reply With Quote
Old 29th July 2006, 03:26 PM   #4
AndrewT is online now AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Hi,
I still cannot find your codes in the irf search

Have you gone to www.irf.com and done a search?
__________________
regards Andrew T.
  Reply With Quote
Old 29th July 2006, 03:40 PM   #5
diyAudio Member
 
Join Date: Oct 2005
yes i have a copy of the data sheet ,part was made in the early 80,s!data sheet no. pd-2.193,dual centertap pos. and neg output rectifiers
  Reply With Quote
Old 30th July 2006, 08:30 AM   #6
AndrewT is online now AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Hi,
Rapid show three dual diodes in their catalogue, 2*15A, 2*14A, 2*30A all made by ST.
I think they are all fast for switch mode, the 15 & 30 are described as ultrafast , soft & noise-free recovery.

I suspect RS & Farnell will have similar.

I use www.rapidonline.com a lot. They are cheap (in UK) fast, free post on orders over 25.

I see the online has no 30A version.
__________________
regards Andrew T.
  Reply With Quote
Old 31st July 2006, 05:26 PM   #7
diyAudio Member
 
Join Date: Oct 2005
thank you for the help andrew,what im finding difficult to find is a pair of soft recovery low trr dual center tapped rectifiers one with a common cathode and the other with a common anode in the 247 case no less than 10a per leg no less than 100v any other reccomendations?
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
center tap to dual secondary conversion neutron7 Parts 4 30th November 2005 09:08 AM
Dual center tap secondary scottw Power Supplies 0 18th September 2005 07:54 PM
Dual tweeter center channel? Grahamt Multi-Way 2 3rd April 2005 06:25 PM
Center Tap vs Dual Secondaries StalfoS Chip Amps 6 18th March 2005 10:10 PM
Anybody heard about Tarzian Silicon Rectifier for Tube Rectifier Replacement? zxx123 Tubes / Valves 4 21st February 2005 04:02 AM


New To Site? Need Help?

All times are GMT. The time now is 10:12 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2