May new old aproach to clones !

zeonrider · 30th June 2006, 08:34 PM

This beautiful amp was made 3 years ago!
All hardware was hand made. Front panel is 20mm thick.
Behind Plexy is 2ch PPM(44led each).
Specification: 100W/ 8 ohm pure A class.
2X 750va toroids, 4X 33000 uf caps.
Soft start, DC offset protection, Thermal protection, are of course self-powered.
Each Ch has its own power supply.
Heat sink is a real masterpeace. Made out of old house radiator.
I used several shematics for channels:
Krell; Treshold; Leach.
Every aluminium part is black anodised.
See the pictures.

zeonrider · 30th June 2006, 08:36 PM

Right Ch.

zeonrider · 30th June 2006, 08:39 PM

close view

zeonrider · 30th June 2006, 08:41 PM

Backpanel .

zeonrider · 30th June 2006, 08:43 PM

Inside.

zeonrider · 30th June 2006, 08:45 PM

That's all for now, to be continued...

bikehorn · 30th June 2006, 09:56 PM

wow, that IS nice. what rail voltages are you running, and most of all, how's the sound?

zeonrider · 1st July 2006, 08:18 PM

DC?, 2x 57v full load. Sound : 1:1 Krell Vs Esotec, 2:0 Esotec Vs Leach. Weight aprox 42Kg.

zeonrider · 1st July 2006, 08:22 PM

Side look !

zeonrider · 1st July 2006, 08:26 PM

Iniside again .

30th June 2006, 08:45 PM	#6
zeonrider diyAudio Member Join Date: Mar 2004 Location: Belgrade RS	& That's all for now, to be continued...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New aproach? Class A/B	Dougie085	Solid State	2	10th July 2007 04:51 PM
KEF clones	nuconz	Multi-Way	3	11th September 2006 04:28 AM
FS: A2 clones	jrsun	Swap Meet	5	7th March 2006 02:29 AM
How would you aproach this rising frequency response?	swak	Full Range	6	4th November 2004 08:30 PM
Hopefully... An objective aproach to the problems people have on this forum	benny	Everything Else	4	14th June 2004 01:14 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th June 2006, 09:56 PM	#7
bikehorn diyAudio Member Join Date: Aug 2004 Location: toronto	wow, that IS nice. what rail voltages are you running, and most of all, how's the sound?