2sk405 to 3sk1529 to 2sk1530

ostie01 · 29th May 2006, 01:46 AM

HI , need replacement for those parts:

2SK405 and 2SJ115

I could substitute with 2SK1529 and 2SJ200 but could not find any of theses at my parts supplier,(back order) he only stock 2SK1530 and 2SJ201 which are rated at 200 volts instead of 160 for the 2SK405 and 180 for the 2SJ200 .All other spec are identicals. Thanks for your time

audiohead · 29th May 2006, 03:32 AM

Hi There:
How many do you need I have matched pairs.
art

ostie01 · 29th May 2006, 03:45 AM

HI, thanks for the reply, those are parts from a Parasound HCA1200. I bought a pair (fet)but they are both blown, don't know if I did something wrong. Never worked with this kind of transistor in the past exept small to-92 ones.When I turn on the amp for the first time after repair, I like to use some sockets with 40 watts bulbs for each boards i.e. four bulbs so this way I know if there's a problem and where it is.Is there any recomendation you can teach me about those fet transistors. I know that small fet are very sensitive to static or if you have a cheap soldering iron.I remember about those fet that if they do have full load, they don't like it. Thanks for any advice. Sorry, about that pair, what could be the price.My parts supplier sold me mine for $3.50 each, Thanks

audiohead · 29th May 2006, 04:41 PM

Hi There:
Do yourself a favor and take it to shop and have it repaired. If you do not have the experience do not even try .

My match quad of k405/j115 are quite expensive they were hand selected by yamaha and were used in my MX-2000 mosfet power amp.

Regards,
art

AndrewT · 30th May 2006, 07:33 AM

Hi,
the K1530/J201 are pretty robust.

With all that capacitance on the gate lead they are very resistant to static as well.

Sounds more like the rest of the circuit has an undiagnosed fault that may have taken out the original FETs, rather than the FETs being faulty.

29th May 2006, 01:46 AM	#1
ostie01 diyAudio Member Join Date: Mar 2005 Location: quebec	2sk405 to 3sk1529 to 2sk1530 HI , need replacement for those parts: 2SK405 and 2SJ115 I could substitute with 2SK1529 and 2SJ200 but could not find any of theses at my parts supplier,(back order) he only stock 2SK1530 and 2SJ201 which are rated at 200 volts instead of 160 for the 2SK405 and 180 for the 2SJ200 .All other spec are identicals. Thanks for your time

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanted 2sk405,2sj115	loke	Parts	8	25th August 2010 02:06 PM
Matched 2SK1530/2SJ201	ashaw	Solid State	9	22nd October 2008 09:56 AM
2sk405 to 3sk1529 to 2sk1530	ostie01	Parts	1	29th May 2006 06:29 AM
2sk405,2sj115 awsome. but obsolete	bkfix	Parts	2	1st April 2006 08:21 AM
2sk1530 for zen v4?	elviukai	Pass Labs	0	12th May 2003 01:01 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th May 2006, 03:32 AM	#2
audiohead diyAudio Member Join Date: Mar 2005 Location: Los Angeles, california	Hi There: How many do you need I have matched pairs. art

29th May 2006, 03:45 AM	#3
ostie01 diyAudio Member Join Date: Mar 2005 Location: quebec	HI, thanks for the reply, those are parts from a Parasound HCA1200. I bought a pair (fet)but they are both blown, don't know if I did something wrong. Never worked with this kind of transistor in the past exept small to-92 ones.When I turn on the amp for the first time after repair, I like to use some sockets with 40 watts bulbs for each boards i.e. four bulbs so this way I know if there's a problem and where it is.Is there any recomendation you can teach me about those fet transistors. I know that small fet are very sensitive to static or if you have a cheap soldering iron.I remember about those fet that if they do have full load, they don't like it. Thanks for any advice. Sorry, about that pair, what could be the price.My parts supplier sold me mine for $3.50 each, Thanks

29th May 2006, 04:41 PM	#4
audiohead diyAudio Member Join Date: Mar 2005 Location: Los Angeles, california	Hi There: Do yourself a favor and take it to shop and have it repaired. If you do not have the experience do not even try . My match quad of k405/j115 are quite expensive they were hand selected by yamaha and were used in my MX-2000 mosfet power amp. Regards, art

30th May 2006, 07:33 AM	#5
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	Hi, the K1530/J201 are pretty robust. With all that capacitance on the gate lead they are very resistant to static as well. Sounds more like the rest of the circuit has an undiagnosed fault that may have taken out the original FETs, rather than the FETs being faulty.